Metallographic Metal Surface Sample Grinding Polishing Machine with
Water Cooling System
Brief Introduction:
iqualitrol GP-2B, MP-2B Grinding and Polishing Machine suitable for
metallographic specimen pre-grinding, grinding and polishing
operation, is the necessary equppment to make metallographic
specimen.
iqualitrol GP-2B, MP-2B equips with cooling device, used to cooling
the sample when grinding, to prevent the sample overheating and
destroy metallographic organization. 2 people can operate at the
same time.
iqualitrol GP-2B, MP-2B is easy to operation, safe and reliable,is
the ideal sample preparation equipment for factories, research
institutes and universities laboratory.
Technical Specifications:
| Model | MP-2B |
| Disc Diameter | φ203mm |
| Rotate speed | 50-1000r/min |
| Input voltage | AC220V/50Hz/1Ph |
| Disc Quantity | 2 |
| Motor | 550W |
| Dimension | 725x710x310mm |
| Net weight | 50kg |
Application Ranges:
iqualitrol MP-2B Metallographic Sample Grinding Polishing Machine
is a single-chip microcomputer control grinding and polishing
machine.
With double-disc and double-speed, it is easy to use.
The grinding disc rotates stable with low motor noise.
With washing function at the bottom of the grinding disc, it can
prevent the accumulation and precipitation of grinding materials.
Only need to change the abrasive paper and polishing cloth, it can
complete various sample grinding, fine grinding and polishing
process, which is the ideal sample preparation machine in the
laboratory.
After a metallographic sample has been mounted, grinding and
polishing creates a flat and even surface. Any potential residue
from the mounting process or damage from the sectioning process are
ground off to expose the actual microstructure of the sample.
Polishing removes abrasions from the previous steps to provide a
smooth surface. iqualitrol grinding and polishing instruments
ensure that metallographic instruments provide a reliably clean
sample that will be ready for further analysis.
Pre-grinder machine is the result of a large-scale research work
and the wisdom of the designers as well as the suggestions of the
users. As an excellent piece of specimen pre-grinding, the
pre-grinder has a lap with a larger diameter compared with the same
kind of machines produced in our country and the rotational speed
of its lap is quite different form that of the machines turned out
in our country in order to meet the requirements of the
pre-grinding of various materials.
The working principle of Pre-grinder machine is as follows: clear
water provided by a water tube flows into the rotating lap and the
abrasive paper flowing over the water throws the water out of the
lap as the result of the excentric force of the rotating lap
forming a vacuum space before the atmospheric rescuer presses the
abrasive paper on the lap tightly. Now it is time to operate the
pre-grinding. When the lap stops rotating, the work is done and
abrasive paper can be easily taken off.
