Bench top UV lamp chamber Touch screen Programmable accelerated
aging test chamber
SANWOOD Benchtop UV lamp Accelerated Aging Chamber is an economic
and easy-to-use machine which can meet some customers’requirements.
It's widely used to simulate sun light with UVA, UVB lamps, to test
kinds of materials like plastic, rubber, leather, coating, plating,
etc.
It is equipped with 3 pcs 20W UV lamps as light sources. Operator
can set the total illumination time, temperature, spray time etc to
simulatethe natural environment which would cause the damaged
factor to samples.
This chamber can isolate 18 pcs standard panels (Size is 150×70mm).
Samples are installed a column form rotating sample rack.During the
test, the sample rack rotate uniformly and ensure every sample
getthe same irradiance energy, increase the compariability and
repeatability oftesting results.
Features:
◆ Touch screen and user-friendly operation interface allow handlers
set the test parameters and monitor all the test process easily.
◆ Equipped with professional UV lamps who has high irradiance
energy: 0.90W/m2(New lamp)
◆ Full stainless steel inner working room with sandwich design,
never getting rusty and leakage. Also prevent water vapour coming
from working room from entering electrical box and damaging
electron components.
◆ Biult-in water level switch, it will alarm and stop running
automatically when under low water level.
Main Technical Parameters:
| Total power | 1.2 KW | | Power voltage | 220±22V/50±0.5Hz | | Working temperature | RT+5℃～60℃ | | Settable range of test time | 1h～9,999h | | Settable range of spray time | 1min-9,999min | | Settable range of spray interval time | 1min-9,999min | | Rated life of lamp | 1,600h | | Wave length of lamps | 313 nm (UVA Lamps) or 340 nm (UVB Lamps) | | Lamp power | 3pcs, each lamp 20 W | | Spray water | 2L/min | | Test capacity | 18 pcs standard panels | | Standard panel size | 150mm×70mm | | Cabinet Size(L×D×H) | 930×460×630 mm | | Net Weight | 72kg |
|
Optional accessories:
1) UV radiometer
2) UVA lamp or UVB lamp for replacement
Test Methods & Material Standards
◆ISO 11507
◆ ISO 4892-1< Plastics-Methods of exposure to laboratory light
sources-Part 1: General Guidance>
◆ ISO 4892-3< Methods of exposure to laboratory light
sources-Part 3: Fluorescent UV lamps>
◆ ASTM D 4587
◆ ASTM D 4329
◆ ASTM G-151
◆ ASTM G-154
◆ BS 2782:Part5,
◆ SAE J2020
◆ JIS D 0205
SANWOOD PRODUCTION
SANWOOD Environmental Chambers was established in 1995, which
integrated Taiwan and Japan technologies. We have been focus on the
most secure and reliable climatic test chamber technology since
established.
OUR EXHIBITION
Our products upgrade constantly and our customers come portable
batteries, power batteries, battery, lithium batteries, lead-acid,
new energy vehicles, electric bicycles, electric tools, electric
systems, solar, military, universities research and other
technology industries fields.
CUSTOMER WITNESS
Products are exported to more than 30 countries, such as Russia,
Singapore, the United States, Turkey, Denmark, Vietnam, India,
Malaysia, Kazakhstan, Austria, Canada, etc.
SANWOOD CULTURE
Sanwood thrived little by little and aims to become the leading
brand in the safety and reliability environmental test equipment
industry all over the worldber.
