NANO SILANE PROTECTIVE LAQUER WL-0107
WL-0107, the long-acting and water-based nano non-film protective
agent, is a special curing agent mixed nano silane oligomers
dispersing in water-based solution with strong surface-active
agent. It can react with the moisture and the carbon dioxide in the
air to form an indissoluble nano protective layer in 24 hours. It
has the features of good water repellency, strong penetration, good
weather resistance, and non-yellowing. The most distinguishing
feature is that WL-0107 can penetrate into the concrete/stone to
3~5m/m and can react with the alkaline components in the
concrete/stone, which can form the crystalloids inside the
substrate to fill and block up the pinholes in the concrete to
achieve the deeper waterproof effect. The endurance life of WL-0107
is about 3-5 years and it can also extend the life time of the
building.
Most water repellence agents on the market are the emulsified
aqueous solution made of Fluoropolymer or Silicone. These kinds of
products have good effect of water diversion but also some
disadvantages:
● Poor Duration: only adhere to the surface of the wall or the
brick, which can’t penetrate into the substrate to do the reaction.
The effect of water repellence will decrease gradually after
raining and wind blowing, so the effect or water repellence usually
can’t last more than 6 months.
● Easy to get polluted: Containing organic components inside and
easy to be decomposed by ultraviolet rays, and this will create a
lot of tiny molecules which will adhere to the wall strongly and
form the black spots on the wall which might pollute the wall and
not easy to get rid of.
Applicable scope
architectural concrete, pebble wash, concrete, and stone with light
color for the function of waterproof, stain resistance, and weather
resistance. (Don’t apply this product on the substrate with dark
color.)
THE CONSTRUCTION METHODS OF WL-0107
1. Fill up the cracks on the surface of the substrate first. All
the surfaces of the substrate must be clean and dry. Clean up all
the dirt, grease, moss, and old coating on the surface and make all
the surfaces of the building totally dry so as to make WL-0107
penetrate into the substrate thoroughly.
2. Roll, paint, or spray a layer of WL-0107 from up to down the
substrate.
3. While applying WL-0107 on the surface of the substrate such as
pebble wash or stone, please wipe out the excess agent of WL-0107
so as to prevent the formation of the white crystalline material.
4. It must be taken over 24 hours to allow the surface of the
substrate to be touched by water after the application of WL-0107.
(The time can be shorten by the exposure to sunlight to increase
the reaction.)
5. Clean up the wax left on the surface of the substrate by using
the cold solvent degreasing agent if the substrate was ever
polished or waxed.
THE USAGE AMOUNT
1 kg of WL-0107 can be applied on the surface area of about 5-10
square meters. (5-10m^2/kg)
THE ADVANTAGE
1. Non-yellowing, no polluted spots left, all the dirt will be get
rid of after raining or washing the wall.
2. High penetration, great consolidation, long durability.
3. Good water repellence, prevent water penetration efficiently.
4. Eco-friendly water-based inorganic molecules which meets the
environmental requirements.
5. It is suggested to repaint the new layer every three years so as
to maintain the effect of water repellence and dust proof.
6. With the south wind’s blowing, the wall can avoid the water
condensing.
CAUTIONS
1. WL-0107can’t be applied on the surface which holds the water
pressure directly.
2. Never apply the agent of WL-0107 on rainy or cloudy days.
3. If you have to apply the agent of WL-0107 on the substrate
twice, please process the second procedure before the first layer
of WL-0107applied on the substrate get totally dry. Never pile the
substrates together before WL-0107 applied on the substrates get
dry.
4. The constructers must wear the helmet, safety goggles, and
plastic gloves while applying the agent of WL-0107
5. Due to there are various kinds of stones, we suggest that you
can choose a little and unobvious part of the substrate to be
tested by the agent of WL-0107 to see if the effect can be
satisfied by you. If the trial can achieve your expectation, then
you can apply the agent of WL-0107doubtlessly.
