VITA Color Dental Opaque Powder D2
for Dental Metal Easy Using
VITA color opaque powder D2 is new ceramic material for dental metal use. Opaque
powder D2 will be used after first fired washing opaque, helping to cover the color of
washing opaque or the color of metal. You can use this opaque powder D2 once or twice
to build the framework, depanding on the labs technicans. Even you
can use this opaque
powder D2 directly withour washing opaque when you useNiCr porcelain with Be.Now
a lot of labs choose our paste opaque instead of others, because of the good quality and
color. You will be surprised at the quite prefect bonding strength of this paste opaque.
The Firing Schedule of Opaque Powder D2:
1. Preheat Temp: 600℃
2. Drying Time: 2 min
3. Heat Time: 6 min
4. Final Temp: 930℃
5. Holding Time: 1 min
6. Vacuum Start: 600℃
7. Vacuum Time: 6 min
The Characteristics of Dental Opaque Powder D2:
- Cover the color of metal quite well, no yellowrish.
|
- No bubbles and cracks on the surface of opaque after firing.
|
- Very easy for using, especially for new staff.
|
- Prefect bonding strength of porcelain fused to alloy or washing
opaque.
|
Opaque Powder D2 Compositon is Following:
SiO2: 35~65 |
Al2O3: 10~25 |
K2O: 8~15 |
TiO2:5~15 |
CeO2: 4~12 |
Pigment: 0~12 |
