LED Highbay Light UFO 150W SMD3030 IP65 5 Years Meanwell Driver
Aluminum SAA UL
1. Description:
UFO LED high bay light, named because of its unique appearance and
appearance as UFO (UFO). High-precision full-automation equipment
is used to form aluminum fin heat dissipation shells at one time,
which has good heat dissipation effect. It uses multiple chip-type
high-power high-efficiency high-effect 3030 LED lamp beads with
uniform light and is equipped with Taiwan Meanwell circular power
supply; equipped with a respirator. , Effectively prevent the
occurrence of fog due to the ambient temperature difference,
waterproof and dustproof performance. Long life, low light decay,
can be widely used in outdoor and indoor harsh applications.
As a new LED high bay light, it adopts the lens light distribution
design and does not need additional reflector light distribution.
Therefore, there is no phenomenon that the traditional LED high bay
light lamp is easily deformed during transportation, and the
transportation cost is relatively low.
2. Specification:
| Input Power | 150W | PF | ≥0.95 |
| Input voltage | AC90-305V | CRI | ≥80Ra |
| working frequency | 50-60HZ | Beam Angle | 60,90,120 degree |
| LED Spec | Osram 3030 | Housing material | Pure Aluminium |
| CCT | 2700-6500K | LED working life | 30000-50000H |
| Lumens | 19500LM | IP Rate | IP65 |
3. Advantages:
1. Lumileds/Osram 3030, Ra>80, 50000 hours, Chip for options,
LM80 standard, high luminous efficiency, long life, cost-effective.
2. The Power Supply: Meanwell HBG series, Inventronics, Sosen
driver for option, 5 years warranty, cost-effective, UL SAA, and
other related certificates.
3. Lens Angles: The PC fireproof material lens with 60°, 90°,
120°beams, will not turn yellow in 5 years
4. The Shell: Integral stamping 1070 pure aluminum sheet metal
housing is with light weight. Powder painting against harsh
environments, and do not change color.
4. Application:
Exterior building lighting of historic buildings, light-exposed
lighting inside the building, indoor local lighting, green
landscape lighting, billboard lighting, medical facilities and
other specialized facilities lighting, stadium lighting.
5. Installation instructions:
1. Please read carefully the LED Highaby Light instruction before
use.
2. Non-professional technicians, please do not repair or modify
this product without authorization.
3, please turn off the power before installation to avoid improper
operation and electric shock.
4. Before installation, please check whether the voltage marked on
the spotlight and the input voltage to be connected are consistent,
so as not to damage the LED Highaby Light.
5, in order to ensure the service life of the product, please do
not use it in places with strong acid mist.
6. Pay attention to shockproof during installation and
transportation.
7. Before installation, ensure that the installation position can
withstand 10 times the weight of the product, and install it in a
flat place without vibration, no swing, and no fire hazard;
8. If the lamp fails, please place the lamp in one place and send
it back to our company for testing and repair.
9. If you find that the lamp wire is broken, stop using it
immediately.
