XPW-900 Automatic Mesh-Belt Type Rubber Batch Off Cooling Machine
Applications
Mesh-Belt, Roller, Hanging type Rubber Batch Off Cooling Machine
is the downstream auxiliary to the mixer or the dispersion mixer.
The Rubber Batch Off Cooling Machine is a commonly used cooling
device in the production of rubber products. The production of
tires, cables, rubber hoses and other rubber products is made much
easier when the rubber sheets are cooled using this equipment. It
cools and dries the rubber sheet produced in rubber mixing mills or
rubber sheet presses so that they can be properly stored.
Character
1. Rubber Batch Off Cooling Machine suitable for use High yield,
Continuous and Flow lines production.
2. Rubber Batch Off Cooling Machine include Feeding connecting,
Talc-powder, Main cooling and Cutting section.
3. The Rubber Batch Off Cooling Machine are suitable for 35L~150L.
| Model | XPG-600 | XPW-600 | XPG-800 | XPG-900 |
| Type of Construction | Floor Type | Mesh-belt Type | Overhead Type | Overhead Type |
| Max. Rubber Sheet Width(mm) | 600 | 600 | 800 | 900 |
| Rubber Thickness (mm) | 4-10 | 2-12 | 4-10 | 6-12 |
| Temperature of Cooling Rubber Sheet Higher Than Room (℃) | 10 | 10 | 15 | 5 |
| Friction Ratio (m/min) | 3-24 | 3-24 | 3-35 | 4-40 |
| Cooling Fans Number(set) | 12 | 12 | 20 | 18-26 |
Description
This Rubber Batch Off Cooling Machine consists of take-off, print,
slitting, transportation, immersing insulation, lifting, sheet
cooling fan with low power, low noise, high wind pressure and large
capacity. The Rubber Batch Off Cooling Machine adopts PLC auto
control system and measures with electric balance. It has two kinds
of installation, floor type and high-frame type, for the user to
choose.
Features
1. Stainless Steel Mesh- Belt Rubber Batch Off Cooling Machine is
used for cooling, folding and depositing the rubber strip that
comes from the open mills or twin screw extruder.
2. There are two structures types: hanging and floor-standing
types.
3. The clients can choose high or low disposition according to the
practical requirments.
4. The high disposition stainless steel rollers rubber sheet
cooling machine has hydraulic auto wig wag section, which can make
the rubber strip tidily.
Advantages
1. The operations of coating separant, air cooling, drying, cutting
and wig-wag stacking are set in one single cooling machine,
achieving continuous operation with higher efficiency.
2. Rubber sheet are soaked before coating separant ,so the coating
effect is very good and no enviromental pollution.
3. Time of air cooling process for rubber sheet cooling is set very
long, so cooling effect is excellent.
4. Rubber sheet can be cut into certain length during operation and
the cutting length can be adjustable.
5. With PLC control and frequency-control speed regulation,it is
very convenient to control the whole working process.
