New Appearance Cement Mortar Shaking Table Cement Mortar Strength
Tester
Product introduction:
GSKA-20H cement cement sand vibrating table is designed for testing
the strength of cement cement sand and adopting ISO679 guo
standard. The instrument conforms to the standard requirements of
JC/T682, GB/T17671,IS0679 "Cement cement sand test forming
vibrating table", which is used for the special equipment of cement
strength inspection.
technical requirements:
1, vibration platform amplitude: 15.0mm+0.3mm
2. Vibration time of 60 times: 60s soil 2s
3. The total mass of the table plate (including arm rod, die sleeve
and fixture) is 13.75kg+0.25kg, and the measured data is marked on
the side of the table plate
4. The total mass of the two arms and their cross ribs:
2.25kg+0.25kg
5, the distance from the center of the table to the center of the
arm shaft: 800mm+1mm
6, when the head is on the stop, the table surface is horizontal,
the height of any corner of the four corners and its average height
difference is not more than 1mm
7. The working face of the protruding head is spherical, and the
contact with the stop is point contact
8, protruding head and stop by Rockwell hardness > Made of
55HRC fully hardened steel
9, the CAM is supported by Rockwell hardness V40HRC steel 10, the
clamp and the mold sleeve is integrated, the mold sleeve can press
the test mold and align with the inside of the test mold
11, the controller and the counter are sensitive and reliable, can
control the vibration table after 60 vibration automatically stop
12, the whole machine insulation resistance > 2.5 M Ω
13, the arm rod shaft rotation without the phenomenon of kuang
14. After the vibration platform is started, there is no swing
phenomenon in the rising process and the moment of impact, and the
transmission part runs normally
15. Center distance of base bolt holes of vibrating platform
16. The paint surface of the external surface of the vibrating
table is smooth, smooth, uniform and the color is consistent. Parts
processing surface without scratches and rust
specification:
Model Number | GSKA-20H |
Power | 90W |
Total mass of the table | 13.75kg±0.25kg |
Total weight of vibration part | 20kg±0.5kg |
Amplitude (falling distance) | 15mm±0.3mm |
Time for 60 vibrations | 60S ± 2S |
Center distance | 800mm |
motor speed | 60 rpm |
Power Supply | AC220V 50Hz |
Overall dimensions | (124x52x80)cm |
Net weight | about 90kg |
If you have any question or need more info about Diagital Soil
California Bearing Ratio Cbr Test Testing Machine, please contact
with us ,thank you
