KN95 N95 Pfe N95 N90 Mask Filter Test Machine / PFE Test Machine
The mask testing machine (pfe) tester, medical face mask particle
filtering efficiency tester(pfe) test machine and medical face mask
particle filtering efficiency tester(pfe) meter of prodcut we have
the high precision,full English control,easy operation,price
competitive,and we already sold to many countries and widely
acclaimed.
Equipment Overview:
It is used for testing the filtration efficiency of particulate
matter of melting and spraying cloth, daily protective masks and
medical masks, as well as measuring the obstruction performance of
ordinary fabrics and medical protective masks to the airflow with
constant flow rate. It is applicable to medical device inspection
center, safety protection inspection center, labor protection
inspection center, drug inspection center, disease prevention and
control center, textile inspection center, hospital, mask
manufacturing enterprise, etc. Scope of application: glass fiber
filter material, PP filter material, laminating.
1. Flow range: (30~100) L/min, accuracy 2%
2. Filtration efficiency: (0.001~99.999)%
3. Resistance: 0~2000Pa, accuracy 2%
4. Test area: 100cm²
5. Aerosol: Sodium chloride (DOP, DEHS, optional)
6. Aerosol concentration: (12~20) mg/m³ (salinity),
7. Test mode: filtration efficiency of filter material
8. Test temperature: (25±5)℃
9. Relative humidity: (30±10)%
10. Overall dimensions: 950×600×1900mm
| Test flow range | 15 ~ 100L / Min (standard 32L / Min) |
| Test sample | 100cm2, can be equipped with multi-specification fixtures (flat
masks, 3D masks) |
| Resistance testing | Mesure range 0 ~ 1000Pa |
| Accuracy 0.1Pa |
| Efficiency testing | Measure range 40% -99.999% |
| Particle size 0.3μm |
| Test particle size | 0.3μm |
| Fog dust source | NaCl, DEHS |
| Test time | Single test resistance: 5S |
| Efficiency and resistance simultaneous testing: 70s |
| Power | 220V, 50Hz, 1KW |
| Gas source | 0.5MPa, 120L / Min |
Standard:
GB/T32610-2016 Technical specifications for daily protective masks
GB 19083-2010 Technical requirements for medical protective masks
GB 19082-2009 Technical requirements for disposable protective
clothing for medical use
GB24539-2009 General technical requirements for chemical protective
clothing
YY 0496-2011 Medical surgical masks
YYT0969-2013 Disposable medical mask
GB 2626-2006 Respiratory protective equipment self-absorption
filter respirator against particulate matter
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
