Alloy 25 Beryllium Bronze Coil TD02 Berryllium Copper 0.254MM*8.2MM
Coil
Product Normal Description:
| Product Name | Beryllium copper Alloy 25 strips |
| Grade | C17200 |
| End Product Form | Strips/Tape |
| Standard | ASTM B194 |
| State of product | Half Hard(TD02) |
| Specification | Thickness: 0.254mm Width: 8.2mm |
| Application | Industrial |
Introduction of Alloy 25 Beryllium Bronze Alloy:
Beryllium Copper is an alloy that is machinable, weldable and
ductile. Alloy 25 copper rod is highly resistant to abrasive wear,
plastic decomposition products, galling and to non-oxidizing acids
like carbonic acid and hydrochloric acid. Beryllium Copper C17200
bar is the strongest and the most widely used of all the Beryllium
Copper materials. Beryllium Copper C172 round bars consists of 1.8
- 2% Beryllium. In Europe, Beryllium Copper C172 Bar is known as
CuBe2 Bar. C17200 beryllium copper round bar is used in many
application areas such as aerospace bushings, drilling tool
components in the oil and gas industry, cavities and cores in
injection mold tooling and bushings and plates in heavy equipment
wear.
Industrial Uses for Alloy 25 Beryllium Bronze Alloy:
Because of their high thermal conductivity, excellent hardness, and
high-temperature strength, copper alloys are frequently used for
applications requiring high electrical conductivity and superior
mechanical strength.
It is its strength that makes this alloy a great choice when you
require wear and corrosion resistance and excellent bearing
properties.
Cuberyllium's Available Forms for Alloy 25 Beryllium Bronze Alloy:
Available forms are beryllium copper welding rod, beryllium copper
wire, beryllium copper bar, beryllium copper bushings, beryllium
copper coil, beryllium copper drill bits, beryllium copper
electrodes, beryllium copper flat bar, beryllium copper fasteners,
beryllium copper gasket, beryllium copper ingot, beryllium copper
nuts, beryllium copper round bar, beryllium copper sheet
Chemical Composition of Alloy 25 Beryllium Bronze Alloy:
| Be | 1.80-2.00% |
| Co+Ni | 0.20% Min. |
| Co+Ni+Fe | 0.60% Max. |
| Others | 0.50% Max. |
| Cu | Balance |
| Note | Cu+Be+Co+Ni+Fe:99.50% Min |
Product Photo of Alloy 25 Beryllium Bronze Coils:
Excellent Properties of CuBe2 Copper Alloys:
Tensile Strength
Beryllium Copper can attain the tensile strength. of 1500N/ mm2
through precipitation hardening and can withstand very high bending
stress.
Corrosion Resistance
Beryllium Copper has excellent corrosion resistance, nearly the
same as Nickel Silver.
Electrical Conductivity
The electrical conductivity of beryllium copper ranges from 20 to
70 %IACS, depending on alloy and temper.
Age Hardenable Tempers
This term means the material can be strengthened by simple heat
treatment after stamping or forming. The strength level will be
roughly doubled by optimum heat treatment.
ASTM Designation Description Name
TB00 Annealed A
TD01 Quarter Hard 1/4 H
TD02 Half Hard 1/2 H
TD04 Hard H
