Green anticorrosive and malleable steel wire is woven into
honeycomb or twisted-shaped mesh
Green mesh is made of special mechanical facilities will have
strong corrosion resistance and ducibility of steel wire woven into
honeycomb or twisted-shaped mesh, engineering design requirements
as the basic premise, made into a box cage and loaded into stone
and other filling materials after the integrated structure, can be
used for roadbed protection, dike and other projects. Generally
speaking, ecological grid technology can not only play a role in
protecting embankment slope and river bank slope, so that soil and
water can be naturally exchanged, improve the ability of water
self-purification, but also play a role in greening vegetation and
landscaping, so as to realize the organic combination of ecological
environment and construction engineering.
Green grid technical parameters:
1. Wire diameter:
1) The range of mesh wire is 2mm-4mm
2) the edge wire is generally larger than the mesh wire, 0.5mm-1mm
thick
3) the binding wire is generally smaller than the net wire, and the
most common is 2.2mm
2. Aperture: 60*80mm, 80*100mm, 80*120mm, 100*120mm, 120*150mm, the
length of the double stranded part shall not be less than 50mm. To
ensure that the stranded part of the wire metal coating and PVC
coating is not damaged.
3. Steel wire tension: not less than 38kg/m2 380N/mm
4. Surface treatment
1) Electric galvanizing. The maximum zinc content is 10g/m2.
Anticorrosion sex difference
2) hot dip galvanizing. The maximum amount of zinc can reach
300g/m2. Strong anticorrosion
3) Galfan (zinc and aluminum alloy). This is divided into two kinds
of materials, zinc -5% aluminum - mixed rare earth alloy steel
wire, zinc -10% aluminum mixed rare earth alloy steel wire. Super
corrosion resistance
4) PVC coated plastic. Generally, the thickness of the plastic
coating is 1.0mm. For example, the thickness of the plastic coating
is 3.7mm after 2.7mm. Anticorrosion strong
Green grid structure features:
1) Integrity: the unit box cage and the septa, box cage are tied
and connected with homogeneous materials, large area continuous
assembly, no joints, the overall structure is stable.
2) Flexibility: test data show that the ecological grid structure
(filled with stones) can withstand considerable deformation when
the compression reaches the ultimate strength, the ecological grid
structure compressive strength of 300~400t/? , tensile strength up
to 495N/? The above. Therefore, when the foundation has uneven
subsidence or earthquake and other sudden disasters, the structure
itself can be adjusted adaptively to achieve a new balance, the
overall structure will not be destroyed.
3) water permeability: there is a gap between the ecological grid
filled with stones, surface water once infiltrated into the soil
behind the wall, it can be discharged quickly through the cage, so
as to reduce the groundwater pressure behind the wall.
4) wind and wave resistance, erosion resistance: the anti-impact
coefficient of ecological grid structure is twice that of general
riprap protection engineering, and its void structure can destroy
the vacuum caused by wave pressure, and vacuum suction will not be
formed when the wave is backoff.
| Type | double twisted woven wire mesh |
| Hole Shape | hexagonal |
| Material | low carbon steel wire ,heavy galvanized wire ,galfan wire ,pvc
coated wire |
| Aperature | 6×8cm ,8×10cm,10×12cm ,12×15cm |
| Size (L×W ×H) | 2x1x1m, 3x1x1m, 4x1x1m, 2x1x0.5m, 4x1x0.5m,5.2×1×0.5m ,3×1×0.5m
,6×2×0.3m |
| Wire Guage | 2.0mm-4.0mm |
| Surface Treatment | Galvanized /PVC Coated |
| Application | flood control ,retaining wall |
| Features | corrosion resistance ,easily assembled |
| Color | silver or black/green ,ect |
Steps of using gabion net
Flood control gabion net is a good choice for reservoir anti-scour
and water storage project. The reasons are as follows:
1. It is a very reliable choice as embankment protection;
2. It is relatively simple and can shorten the construction period
of the project very well;
3. Ecology is incomparable with other construction methods.
FAQ:
Q: Are you a trading company or manufacturer ?
A: We are factory. We are manufacturer of Wire Mesh .
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
10-15 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=100000USD, 100% in advance.
Payment>=100000USD, 30% T/T in advance ,balance against copy of
B/L.
