Horizontal Tensile Test Using Universal Testing Machine 3000KN
5000KN
performance feature:
1 Host: the whole frame adopts steel plate welding frame structure,
through the front and rear collet seat, cylinder and front beam
composition system main structure; The rear collet seat is manually
pushed to adjust the test space. The appearance of the main engine
is designed on the basis of meeting the technical requirements of
horizontal test equipment. The shape is simple and lively, the
proportion is coordinated, and the color collocation is reasonable,
so that the stability, safety and beauty of the test equipment are
perfectly unified.
2 Oil source system (pump station) : constant pressure pump group:
domestic well-known brand motor, imported low noise high pressure
gear pump. The motor is installed with vibration damping device
(choose vibration damping pad) to reduce vibration and noise; Tank:
fully enclosed standard tank, volume 80 litres, and the oil
temperature, oil level meter, precision pressure filter, air
filter, etc. With the oil temperature, liquid level, oil
resistance, protection and loading 등 instructions according to the
requirements of the oil used with corresponding high precision oil
filter device. With temperature over limit, oil filter blockage,
low liquid level automatic shutdown or alarm function; Piping
system, the hydraulic line of the master cylinder cutter Li bucket
actuator is connected with a high pressure hose.
Technical Parameters:
| MODEL | WAL-3000 |
| Maximum load | 3000kN |
| Structure | Single rod double-acting cylinder frame structure |
| Drive control mode | Computer controlled electro-hydraulic servo control |
| Test type | Tensile strength test / Loading hold test |
| Overload protection | 105% overload protection |
| Noise of the whole machine | no more than 70dB |
| Accuracy of load indication | better than ±1% of indicated value |
| Load resolution | 500000 yards, and the whole resolution remains unchanged |
| Load control accuracy | Class 1.0 (class 0.5 is optional) |
| Force value measuring range | 2%~100%F·S (the whole process is not divided into files) |
| Stress control accuracy | better than ±1% of the indicated value |
| Accuracy of displacement indication | better than ±0.5% of indication |
| Displacement resolution | 0.001mm |
| Displacement control accuracy (speed) | better than ±0.5% of the indicated value |
| Piston moving speed range | 0-100mm/min full load stepless speed regulation |
| Piston stroke | 500mm-1500mm |
| Maximum Tension space | 4000mm-30000mm |
| Tension space adjustment interval | 500mm |
| Tension space width (inner clear width) | 600mm |
| Height of the center of the Tension space | 600mm |
| Total motor power | 4.0 KW
|
Customer Support Services:
1. Installation
2. Training (Training customer employees)
3. Calibration
4. Preventative maintenance
5. Replacement parts
6. Assistance via phone or internet
7. On-site diagnosis and repair/online diagnosis and repair
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
