Lithium-ion Battery Vacuum Diffusion Machine for Electrolyte
Standing
Brief Introduction
This equipment is mainly used to make electrolyte and electrode
fully mix under vacuum condition after electrolyte injection for
pouch cell and cylindrical cell. The equipment is made of
high-quality electronic components and materials. It is applicable
for various sizes battery, easy operation and efficient production.
Features
● Fully welded vacuum chamber and fluoroelastomer sealing for
stable vacuum maintenance.
● Multi-stage cycles operation function makes the electrolyte
absorbing more completely.
● Through perspective window can observe the changes inside the
chamber during work.
● The upper chamber is driven by cylinder and guided by two linear
guide bushings, which are flexible in up and down movement, and
ensure the sealing environment requirements.
● Applicable for different sizes battery, adjust simply and
conveniently.
● Adopting the split design of electric box and work box enables
the machine can work in the glovebox or on production line.
● Attractive appearance, small size, easy to operate.
Technical Parameters
| Model | STC-BJZ-300 |
| Voltage | AC220V±10%, 50Hz |
| Power | 0.5KW |
| High and low vacuum holding time | Multi segment cycle setting |
| Vacuum degree | ≥-95KPa |
| Compressed air | 0.4~0.5Mpa, if the unit is placed in a glovebox, air source should
be used in accordance with the working air of the glovebox |
| Inner dimension of chamber | L320 * W320 * H175mm |
| Dimension | Electric box: L460 * W350 * H340mm Working box: L500 * W350 * H630mm |
| Weight | 57kg |
Warranty
1 year's warranty with lifetime technical support.
FAQ
1. Are you a manufacture ?
A: Yes,our factory is located in Shenzhen, China. We have more than
10 years experience for manufacturing battery lab research
equipment. We owns a professional R&D department.
2. Do you accept customized product ?
A: Yes. Most of our products can be customized to meet different
requirments.
3. Will you provide test video before dispatch ?
A: Yes, we take test video for every equipment before dispatchm
which will display how to use it.
4. Can you offer overseas installation service ?
A: Yes, we can dispatch professional engineer for on-site
installion service.
