Eltek Flatpack S 36V/1000W HE UI Rectifier Module (Part No.:
241123.235)
Flatpack S 36V/1000W HE UI
Applications in these markets demand state of the art, reliable and
safe DC power systems. Flatpack S delivers an industry leading
power density in its segment, many safety functions, wide operating
temperature range and superb reliability in its small 217mm deep
housing.
Compact and reliable rectifier for rail and power utilities
applications
Used in the 3U rack with Smartpack S controller, the Flatpack S
rectifiers cover 2 to 8kW applications using a minimum of space,
less than 18 liters, and low heat dissipation.
Key features
- Small
- Short
- Power dense, 26 W/inch3
- High efficiency
- OR-ing protection on output
- Wide AC and DC input range
- Hot pluggable
- Voltage keying
- Rail EMC certification
- Global compliance (CE, UL)
Parameters :
|
| Model | 36/1000 HE UI |
| Part number | 241122.235 |
| INPUT DATA |
| Voltage (nominal) | 185 - 400 VDC / 185 - 275 VAC |
| Voltage (operating range) | 85 - 400 VDC / 85 - 305 VAC |
| Frequency | DC, 16 2/3 Hz, 45 - 66 Hz |
| Current (maximum) | 5.9 ADC / 5.9 ARMS |
| Protection | Fuse in Positive & Negative, Reversed polarity insensitive,
Shutdown above 420 VDC / 305 VAC |
| OUTPUT DATA |
| Voltage | 40 VDC |
| Voltage (adjustable range) | 331) - 45 VDC |
| Power (maximum) @ nominal input | 1000 W / 450 W @16 2/3 Hz input |
| Power (maximum) @ 85 VDC / 85 VAC input | 440 W / 440 W |
| Current (max cont.) @ nominal input | 27.8 A (@VOUT < 36 VDC) |
| Hold up time, maximum output power | >10ms; output voltage > 33 VDC |
| Current sharing (10 - 100% load) | ±5% of maximum current from 10 to 100% load |
| Static Voltage regulation (10 - 100% load) | ±0.5% |
| Dynamic Voltage regulation | ±5.0% for 10-90% or 90-10% load variation, regulation time <
50ms |
| Ripple | < 150 mVPP , 30 MHz bandwidth |
Protection
| ORing FET Short circuit proof High temperature protection Over voltage Shutdown |
| OTHER SPECIFICATIONS |
| Efficiency | > 95 % |
Isolation
| 4.2 kVDC - input to output 2.25 kVDC - input to earth 710 VDC - output to earth |
| Alarms: Red LED | Low and high input voltage, High and low temperature shutdown,
Rectifier Failure, Overvoltage shutdown on output, Fan failure when
fan stops, Low output voltage alarm, CAN bus failure |
| Warnings: Yellow LED | Rectifier in power de-rate mode, Remote output current limit
activated, Input voltage out of range, flashing at overvoltage,
Loss of CAN communication with controller |
| Normal operation: Green LED |
| Alarm relay (NO - opens when de-energized) | Opens on Alarms and missing input voltage. |
| MTBF (Telcordia Issue 3 & Method II Case L1) | >2 700 000 (@ Tambient : 25 °C) |
| Operating temperature (5-95% RH n.cond. hum.) Maximum output power
de-rates above temp / to | -40 to + 85°C [-40 to +185°F] 45°C [140°F] / 400W @ 85°C [185°F] |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
| Dimensions[WxHxD] / Weight | 72 x 40 x 217mm2) (2.84 x 1.57 x 8.54”)2) / < 850 g (1.9 lbs) |
| DESIGN STANDARDS |
| Electrical safety | EN 60950-1:2006+A11:2009+A1:2010+A12:2011 |
EMC
| EN 61000-6-1:2007, -6-2:2005, - 6-3:2007 + A1:2010, - 6-4:2007 +
A1:2010 EN 50121-1:2015, -2:2015, -4:2015, -5:2015 |
Environment
| ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) RoHS (2011/65/EU) and WEEE (2012/19/EU) compliant |
1) limited standby operation / needs some load to get to min set
voltage 2) including handle depth is 234mm [9.21"] and height 42mm [1.65"] |
Solutions
We provide a one-stop solution for Telecommunication Companies
operating in China and internationally. Our services kick off with
a comprehensive site survey to understand the infrastructure and
requirements. Based on the survey results, we propose professional
and scalable plans that can adapt to the customer's growth. Our
technical support is highly responsive, offering quick solutions to
technical problems, and our maintenance services ensure the
reliability of telecom systems. With a competent team and a
well-established network of trusted partners, we are committed to
delivering excellence.
FAQ :
1.Q: Is it possible to get product samples and price quotes?
A: Samples are available upon request. The sample cost is based on
the regular price, and you’ll need to cover the shipping expenses.
2.Q: How do you deal with quality - related claims?
A: With nearly a decade of experience in this field, we have built
a good reputation. When a quality issue occurs, we’ll conduct a
careful analysis. If it’s due to our fault, we’ll follow the
contract provisions to resolve the problem and ensure you have no
post - purchase worries. Our service team is always on standby to
assist you.
3.Q: What kind of quality can I expect from your products?
A: All our products are brand - new, 100% original, and come in the
original packaging. Each item is rigorously tested before being
sent out to ensure top - notch quality.
4.Q: How long does the product guarantee last?
A: Our products are guaranteed for 1 year. During this period,
we’ll handle any quality issues related to manufacturing defects.
5.Q: What happens if I receive products of poor quality?
A: Within the warranty period, for any products with quality
problems, we’ll cover the cost of return shipping and send you
replacements.
