Mean Well 240W Slim Three Phase Industrial DIN Rail with PFC
function TDR-240 series TDR-240-24
Mean Well 240W Slim Three Phase Industrial DIN Rail with PFC
function TDR-240 series
TDR-240-24 TDR-240-48
Features:
Metal case, slim size
3∅, 340~550VAC input
High efficiency up to 94.5%
Built-in active PFC function
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
Technical
| MODEL | TDR-240-24 | TDR-240-48 |
OUTPUT | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 10A | 5A |
| CURRENT RANGE | 0 ~ 10A | 0 ~ 5A |
| RATED POWER | 240W | 240W |
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | 48 ~ 55V |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% |
| LOAD REGULATION | ±1.0% | ±1.0% |
| SETUP, RISE TIME | 2000ms, 60ms/400VAC 1500ms, 60ms/500VAC at full load |
| HOLD UP TIME (Typ.) | 20ms / 400VAC 40ms / 500VAC at full load |
INPUT | VOLTAGE RANGE Note.4 | Three-Phase 340 ~ 550VAC (Dual phase operation possible in
connecting L1,L3,FG or L2,L3,FG) or 480 ~ 780VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF≧0.53/400VAC PF≧0.52/500VAC at full load |
| EFFICIENCY (Typ.) | 92% | 92% |
| AC CURRENT (Typ.) | 0.69A/400VAC 0.6A/500VAC |
| INRUSH CURRENT (Typ.) | COLD START 50A |
| LEAKAGE CURRENT | <2mA / 530VAC |
PROTECTION | OVERLOAD | 105 ~ 130% rated output power |
| Protection type : Constant current limiting, unit will hiccup after
3 sec. |
| OVER VOLTAGE | 30 ~ 36V | 56 ~ 65V |
| Protection type : Hiccup mode, recovers automatically after fault
condition is removed. |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature
goes down |
| FUNCTION | DC OK REALY CONTACT RATINGS (max.) | 60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load |
ENVIRONMENT | WORKING TEMP. Note.5 | -30 ~ +70℃ (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
| TEMP. COEFFICIENT | ±0.05%/℃ (0 ~ 60℃) |
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z
axes; Mounting: Compliance to IEC60068-2-6 |
| OPERATING ALTITUDE Note.6 | 5000 meters |
| OVER VOLTAGE CATEGORY | Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1;
altitude up to 2000 meters |
SAFETY & EMC (Note 7) | SAFETY STANDARDS | UL61010-1, UL61010-2-201, BS EN/EN61558-1, BS EN/EN61558-2-16,
AS/NZS 62368.1, EAC TP TC 004 approved |
| WITHSTAND VOLTAGE | I/P-O/P:4.87KVAC I/P-FG:2.4KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH |
EMC EMISSION | Parameter | Standard | Test Level / Note |
| Conducted | BS EN/EN55032(CISPR32)/BS EN/EN61204-3 | Class B |
| Radiated | BS EN/EN55032(CISPR32)/BS EN/EN61204-3 | Class B |
| Harmonic Current | BS EN/EN61000-3-2 | Class A |
| Voltage Flicker | BS EN/EN61000-3-3 | ----- |
EMC IMMUNITY | BS EN/EN55024 , BS EN/EN61204-3 |
| Parameter | Standard | Test Level / Note |
| ESD | BS EN/EN61000-4-2 | Level 4, 15KV air ; Level 4, 8KV contact |
| Radiated Field | BS EN/EN61000-4-3 | Level 3 |
| EFT / Burst | BS EN/EN61000-4-4 | Level 3 |
| Surge | BS EN/EN61000-4-5 | Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth |
| Conducted | BS EN/EN61000-4-6 | Level 3 |
| Magnetic Field | BS EN/EN61000-4-8 | Level 4 |
| Voltage Dips and Interruptions | BS EN/EN61000-4-11 | ＞95% dip 0.5 periods, 30% dip 25 periods＞ 95% interruptions 250 periods |
OTHERS | MTBF | 1534.9K hrs min. Telcordia SR-332(Bellcore); 215.6K hrs min.
MIL-HDBK-217F (25℃) |
| DIMENSION | 63*125.2*113.5mm (W*H*D) |
| PACKING | 1Kg ; 12pcs/13Kg/1.22CUFT |
Solutions
Our telecom services transcend borders: site feasibility studies,
culturally adapted planning, 24/7 multilingual technical helpdesks,
and regional maintenance teams. With 100+ partners worldwide, we
ensure global consistency.
FAQ :
1.Q: How do you make sure products are good?
A: Before we ship anything, we test it like someone would use it in
real life. We check it under light and heavy use, and make sure the
electricity flows right. This way, you get a product that works.
2.Q: Do I need to order a certain amount?
A: Nope! You can order just 1 if that's all you need. The only
difference is that the price per item and when it arrives might
change if you order more or less.
3.Q: Tell me about your company?
A: I'd love to! I'll send you a document that tells you
everything—where we're based, how long we've been around, what we
make, and more. It's an easy way to learn about us.
4.Q: What's good about your company?
A: We keep a lot of products in stock so you can get them fast. We
also make sure you can keep getting them in the future. And we're
flexible—we can help with different needs in different ways.
5.Q: Can I get samples and see how much they cost?
A: Yes, you can get samples. The price for samples is the same as
if you bought a lot, and you'll need to pay for shipping them to
you. We'll let you know the price when we send the samples.
