Hot and Cool Water Pipe Production Line , PVC Pipe Making Machine ,
Sewer Pipe PVC
Quick detail:
1.Extruder Process
Material Hopper → PVC pipe extruder → mould → calibrator → vacuum
calibration tank → spray cooling water tank → printer →haul-off→
cutter → pipe discharging rack
2.PVC plastic pipe material production line is mainly used in the
area of agricultural water supply system, architectural water
supply system, pavement of cables, etc.As well as PVC pipe material
of all sorts of pipe caliber and wall thickness.
Description of pvc pipe making machine:
1.The PVC pipe extrusion machine is used to produce pipes with
different diameters by replacing extrusion dies. It can produce
every size of pipe in the area of the agricultural water supply
system, architectural water supply system, pavement of cables, etc.
It can produce the conduit pipe, pressure pipe, water pipe,
drainage pipe, etc.
2.The PVC pipe extrusion machine is used to produce pipes with
different diameters by replacing extrusion dies. It can produce
every size of pipe in the area of the agricultural water supply
system, architectural water supply system, pavement of cables, etc.
It can produce the conduit pipe, pressure pipe, water pipe,
drainage pipe, etc.
3.This machine group consists mainly of twin conical (parallel)
screws extruder, vacuum calibrating tank, haul-off unit, cutting
unit, tilter, etc. single screw extruder and haul-off unit have
applied imported A/C inverter, both vacuum pump and driving motor
have applied excellent products.
4.The drawing machine includes two-claw type, three-claw type,
four-claw type, six-claw type, eight-claw type, etc. Saw cutting or
planet cutting can be applied, it is additionally applied with
length measuring meter and thickness increasing device, the
property of machine group is reliable, the production efficiency is
high. It has reached world advanced level.
Technical parameters:
| PVC PIPE EXTRUSION LINE |
| MODEL NO. | KPM63 | KPM160 | KPM250 | KPM315 | KPM450 | KPM630 | KPM800 |
| production range (mm) | 16-63 | 20-160 | 75-250 | 110-315 | 110-450 | 315-630 | 400-800 |
| extruding capacity (kgs/h) | 120-220 | 150-250 | 200-330 | 280-50 | 400-500 | 600-700 | 800-1000 |
| screw diameter (mm) | 65/132 | 65/132 | 80/156 | 80/156 | 92/188 | 92/188 | 110/220 |
| driving motor AC+VF | 30 kW | 37 kW | 55 kW | 110 kW | 110 kW | 132 kW | 172 kW |
| heater capacity | 18.5kw | 20kw | 40kw | 49kw | 60kw | 60kw | 84kw |
| temperature control (points) | 4 | 5 | 5 | 7 | 7 | 8 | 7 |
| cooling system | vacuum pump 4-7.5kw / water cooling system / stainless steel |
| haul-off unit | 2 tracks | 4 tracks | 6 tracks | 8 tracks |
| driving motor AC+VF | 3kw | 3kw | 4kw | 4kw |
| cutting unit | common cutting | planetary cutting |
| driving motor | 1.5kw | 4kw | 4kw | 5kw |
| stacking unit | air cylinder system |
| weight (tons) | 7-8 | 7-8 | 9-10 | 10-11 | 12-14 | 14-16 | 20-22 |
| used floor space l*w*h (m) | 25*2.6*3.0 | 28*3.0*3.2 | 36*3.5*3.2 | 40*3.5*3.2 | 42*3.5*3.2 | 45*3.5*3.5 | 60*4.0*3.5 |
Application of pvc pipe machine:
PVC Pipe Extrusion Line/PVC Pipe Production Line/PVC plastic pipe
production line is mainly used in the area of agricultural water
supply system, architectural water supply system, pavement of
cables, etc. as well as PVC pipe material of all sorts of pipe
caliber and wall thickness.
Machine Competitive Advantage:
1.Replacement molds can produce pipes with different diameters.
2.With a set of molds to produce two or four tubes at the same
time.Increased production efficiency.
3.More cost-effective production line.
4.Greatly saving the use of the factory space.
5.High energy efficiency.Just a set of power systems.
6.Can significantly reduce the number of operators.
7.Simple operation.
Machine pictures:
