Five Wire Cutting Stripping Crimping Tinning Machine With Auto
Feeding System Copper Wire Tinning Machine
Automatic Terminalboth end Crimping Machine(short and fine wire)
Equipment Configuration
With the German high pixel image detection system
Equipped with high precision(Japan
THK),cylinder(SMC),motor(MITSUBISHI) sensor(OMRON)
Cutting Precision
It is based on a capacitive measuring principle, is integrated in
the blade holder and can be operated using any standard stripping
blade.
The sensitivity of the monitoring can be configured using setting
parameters. Defective wire ends are detected automatically and
rejected
Cutting length shorter than 100mm, error range 0.5mm+
Self-Developed Crimping Head
Pass CPA+ pressure stability test CMK can reach to 4.0 or
higher,far higher than the industry standard 1.6(Detailed data
reports can be provided)
Higher stability and accuracy
Adjust height on touchscreen
Equipment Function
1. Double camera shot visual inspetion
2. Discharge the defective and without crimping at A end
3. Pressure detection function at both A and B end
4. Discharge the defective ones and then fool-proof clipping
5. Adjust the crimping height on touchscreen
6. High speed, the maximum can reach 3200pcs/H
Technical Parmeters
| Mechine Function | Wire measuring cutting, Two ends(half striping, striping,
pressing), Stripping length, Penetraction depth crimping sinking
buffer structure, Terminal vertical delivery device pre-striping
the whole line function |
| Capacity | Both-end crimping 3200pcs/H |
| Drive Mode | Mitsubishi SERVO Drive, IPC |
| Wire Size | AWG30-AWG14 |
| Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
| Wire Cutting Length | 30-9999mm |
| Cutting Precision | ±0.5mm |
| Stripping Length | 1.0-15.0mm |
| Penetraction Depth | MAX 3mm |
| Crimping Capacity | 2 TON servo motor two sets mute specifications |
| Detection Device | Air pressure decline, Wire exists or not, Wire overload, Terminal
exists or not, Terminal overload, Stripping images detection,
Terminal images detection, Pressure detection |
| Power Source | Single-phase/220V/50Hz |
| Power | 3KW |
| Compressed Air | 0.5Mpa about 140NL/Min |
| Equipment Size | L1510*W980*H1780mm |
| Weight | 600KG |
