Stainless Steel Wedge Wire Screen Tubes For Wastewater Treatment
stainless steel vee sharped wire / wrap wire, johnson screeen,
water well screen / rod based wire wrapped screen, wedge wire
screen, reverse wedge wire screen, stainess steel strainer pipe, v
wire slot tube, perfect roundness well screen pipe, dewatering well
screen, dewatering screen panel, wedge wire grating, v wire flat
panel, screen nozzle, water and gas strainer nozzle, stainless
steel filter nozzle, wedge wire support grids, sieve bend plate, v
wire screens, ARC screen, filter bottom nozzle, stainless steel
lateral screens, wedge wire filter candles, Rotary drum screens,
strainer cylinder, sand control well screen, oil well screen, rod
basedc ontinuous slot screens, header and hub laterals & hub radial
laterals etc.
Wedge Wire Screen Tube is a multi-functional screen.
Slit (slot/ Gap) can be set with higher precision compared with
wire mesh / stamped steel plates or other screens, with a tolerance
independently defined. We can support slits of minimum 25 μm (0.025
mm).
Because many processing variations are possible, Wedge Wire Screen
Tubes can be manufactured in various shapes such as flat,
cylindrical or conical.
Wedge Wire Screen Tubes Advantage:
① Screen formation with wire diameter larger than the slit is
possible.
② Because the screen surface is smooth, the degree of wear is
constant.
③ The standard material is stainless steel (SUS304, 316L).Also can
be other material according to your request.
Therefore, Wedge Wire Screen Tubes feature higher strength and
durability than filters such as wire mesh, perforated plates or
filter cloths, and depending on the usage environment and material,
they can be used almost indefinitely without replacement, reducing
running costs. In addition, we are also able to produce Wedge Wire
Screen using special materials such as titanium or duplex stainless
steel.
Welding Ring Johnson Wedge Wire Screens, Profile Wire Screens
| Water Well Screen |
| Specification (Profile wire): | Width (mm) : 1.50 1.80 2.30 3.00 3.30 3.70
Height (mm) : 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00 |
| Specification (support rods): | Width (mm) : 2.30 3.00 3.30 3.70
Height (mm) : 2.70 3.60 4.70 5.60 6.30
Round : From 2.50mm to 6.5mm |
| Note : other wires and rods available upon request |
| Slot size | 0.10 , 0.15 , 0.20 , 0.25 , 0.30 …… 6.00mm also achieved upon
request . |
| Material: | Mild steel wire, iron, Low Carbon Galvanized wire ( LCG )
,Stainless Steel ( 205B,304, 316L, 321 etc .) |
| Length | 2.9 meters ,3 meters, 5.8 meters , 6 meters. |
| Diameter | 1-1/2 ″, 2 ″, 2-1/2 ″, 3 ″, 3-1/2 ″, 4 ″, 4-1/2", 6 -5/8″,7 ″, 8
-5/8″, 9- 5/8 ″, 10 ″, 10-3/4", 12-3/4 ″, 13 -3/8 ″, 14 ″, 16 ″ |
| Screen end | Plain beveled ends for butt welding or threaded, Thread fitting, Flange, Closed Plated, Resistance welded closed
plate, Metal Ring, etc |
Other sizes available on request. Deep well construction specifications available on question. Well depths :100 m, 200 m, 350 m & 600 m. |
Advantage
| Reduce energy consumption and increase water flow.
Reduce erosion of entry surfaces and increase well life. Allow a uniform and efficient well development. Reduce significantly potential pump damage and subsequent
maintenance costs. |
OEM service:
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can
produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such
as flanges, weld rings, or threads, so that the pipes can be
connected to meet
---------------------------------------------------------------------------------------------------------------
FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q:To quote,what’s information needed?
A: Material, slot (mesh size), diameter/ width, length, end type /
frame size, quantity, usage,etc.
Q: How long is your delivery time?
A: It is 3-5 days if the goods are in stock; for mass order, it
based on the quantity.
Q: Could you provide free sample?
A: Yes, it is available for free sample, but the customers need to
pay the cost of freight, which can be deducted in following order.
Q: What is your terms of payment?
A: 30% T/T as deposit,the balance before shipment.
Q:How to confirm the quality about your products?
A:During production, a few samples can be delivered to you for
quality confirmation. but the customers need to pay the cost of
freight.
Q: How do you make our business long-term and good relationship?
A: Effective communication; Qualified products, competitive prices,
timely delivery, considerate service, etc.
