GD1313 Gantry Type CNC Drilling Milling Machining Center Tool Form BT50

GD1313 Gantry Type CNC Drilling And Milling Machining Center Tool form BT50

1. Description Of The Machine:

1.1 Main structure of machine

GD1007 adopts the most stable gantry frame, the bed is arranged with stiffeners, and the bed structure is thick. The cross-sectional optimized beam is arranged with large-span stepped guide rail, and the z-axis of the high-strength saddle is constructed with six-slide block, which makes the headstock with high static and dynamic rigidity. The machine is composed of the main key parts, the main motion system, the feed motion system, the tool storage auxiliary system, the pneumatic system, the lubrication system, the protection system, the chip removal and cooling system, the electrical control system and so on.

1.2 Main key parts of machine

GD1313 main key large parts of the bed, table, column, saddle, spindle box material is HT300 high strength gray cast iron, with good rigidity and shock absorption, good accuracy retention.

GD1313 all key items are completed by our company CNC gantry machining center, roughing and semi-finishing and imported by Japan's new Japanese machine multi-function gantry pentahedron machining center (HF - 5 m) in constant temperature workshop to complete the final finishing process, to ensure that key large machining precision, thus ensuring the geometric accuracy of machine tools.

1.3 Main motion system of machine

GD1313 main motion system adopts spindle servo motor through belt drive, driving the mechanical spindle structure, the details are as follows:

The spindle unit is the core part of the machine tool, using high precision spindle unit, model: BT50, the main motion system adopts the spindle servo motor power of 15/18.5kW, transmission structure is belt drive, the maximum output speed of 4000RPM, output torque of 214/255N.m.

1.4 Machine feed movement system

GD1313 has a total of three linear feed shafts. The three-axis feed mechanism adopts AC servo motor. The non-backlash elastic coupling is directly connected with the lead screw to directly drive the ball screw to rotate and realize the reciprocating motion of each shaft.

1.5 Machine tool magazine:

GD1313 adopts the factory homemade servo tool magazine, the tool change method is in situ, high reliability, fast tool change; The specific parameters of tool magazine are as follows:

Tool form …………………………… BT50

Magazine storage quantity...... . ........................ 16pcs

Maximum diameter (full tool/adjacent tool empty)... ........Φ 133 / Φ 200 mm

Maximum tool length …………………… 300mm

Maximum tool weight................................ 15KG

1.6 Machine tool protection system

GD1313 rail protection form: X-axis is 201 stainless steel protective pull plate, Y-axis is the organ cover, the Z-axis is a stainless steel armor flakes provide adequate protection for the feed system; machine tool machine protection is designed and manufactured by our company, machine tool operation area Using a fully enclosed form to ensure the safety and protection performance during the operation.

1.7 Machine tool chip removal and cooling system

GD1313 chip USES twisted-pair cage and rear chain chip removal device, pick up crumbs.

The cooling system adopts two cooling methods of tool internal cooling and external cooling. The internal cooling adopts 20bar, 65L/min high-flow high-pressure center water filtration system, and the external cooling adopts 67L/min flow rate and 27m head to ensure the reliability of cooling.

Standard configuration of high-pressure water gun, can better clean the machine tool iron filings.

1.8 Machine pneumatic system

GD1007 adopts pneumatic control components with reliable performance and good stability to change the tool for the spindle, clean air blowing for the spindle center, and dry and clean compressed air for the external air gun.

1.9 Machine tool electrical control system

GD1007 choose KND K2100 CNC system, the system software has a wealth of alarm detection function, can block the fault in time to further expand, greatly reduce the risk of equipment damage and personal injury, the machine main electric elements adopt domestic and international famous brands, superior electric parts quality, stable performance, guarantee the stability of machine tool long trouble-free operation.

2.Main Technical Parameters

3.Main Configuration List

Shanghai HD M&E Tech Co., Ltd is located in Shanghai, China. We specialize in CNC lathe, vertical machining center, horizontal machining center, gantry machining center, five-axis machining center, turn-milling center and various other CNC equipment. We have more than 200 kinds of machine tools. The quality and technology of products have reached the international advanced level.

Our factory has over 80 years’ history of manufacturing machine tools. The first lathe, drilling machine and boring machine were all born here. They have been one of the leader of China's Machine Tool industry and the largest machine tool manufacture in China.Machine tool products cover automobiles, aviation, new energy, construction machinery, ships, pump valves, bearings, 3C electronics, molds and other industries.

We have a powerful technical team and could provide you with quick and efficient pre-sales consulting. We could provide customized machine tools, product's fixture, cutting tools, measuring instrument and automatic production line etc. Also we have a professional service team that can provide equipment installation, commissioning and training services overseas.

We have exported the machines to all over the world, such as America, Europe, Australia, Russia, Southeast Asia, India, Bangladesh, Pakistan，Brazil, Turkey and have been highly praised by our clients.

We take the mission of providing the machine tools with leading technology, high quality and good service to our customers all over the world!