DN25 1'' Flanged Type Pneumatic SS Ball Valve With Actuated
Pneumatic ball valves are used to control the flow of a media,
liquid or gas, by means of a rotating ball with a bore. The
rotating ball is controlled by a pneumatic actuator that is capable
of turning it. A ball valve is one of the most common valves due to
their simple operation, reliability, long service life, and wide
range of application uses.
2-way pneumatic ball valves have 2 ports, an inlet and an outlet.
The media flows from one direction to the other and the valve is
used to open or close the flow. A 2-way ball valve is commonly
called a shut off valve.
3-way pneumatic ball valves have 3 ports. The bore in the ball is
not straight, but rather in an L or T formation. This allows for
various circuit functions (flow directions) for the valve. It can
be used to distribute, mix, or divert flow in the desired
direction. Therefore, any of the 3 ports can be an inlet or an
outlet.
Technical Data of Pneumatic Ball Valve:
| |
Air Pressure: 0.4 to 0.8 MPa | Electric Actuator Power: 380VAC, 220VAC, 110VAC (50/60Hz), 24VDC Electric Actuator Input: 4-20mA. DC |
Control Medium: Neutral Gas, Air |
Ambient Temperature: -20 to +60℃ |
Medium Temperature: -20 to +180℃ UPVC Ball Valve: -10 to +45℃ CPVC Ball Valve: -15 to +90℃ |
Normal Seal's Working Temperature: PTFE (-20 to +180℃), TFM (-30 to
+230℃) |
Manufacturing Standard: GB, ISO, ANSI, BS, DIN |
Main Dimension of Pneumatic Ball Valve:
More Pneumatic Actuator Valves for you to choose:
| Pneumatic Ball Valves |
 |  |  |  |
 |  |  |  |
| Pneumatic Butterfly Valves |
 |  |  |  |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
