Black Impact Roller Inlet 0.8m/s Speed Sand Conveyor Belt Machine
TD75 series universal Conveyor Belt Machine is suitable for the
occasions of transporting bulk materials or finished products in
coal, chemical, water and electricity sectors. The working
environment temperature is between 10° to 40°, the conveyed object
is below 50°C.
Component of Sand Conveyor Belt Machine
TD75 series universal Conveyor Belt Machine consists of conveyor
belt, driving device, idler, frame, tensioning device and so on.
The driving device is the power transmission mechanism of the belt
conveyor. TD75 series universal fixed belt conveyor adopts
oil-cooled electric drum (referred to as electric drum), which is
mainly composed of support, drum body, drive motor, left and right
flange shafts, gears, inner gear ring, etc.
The idler is the support device for the conveyor belt and the load
of the TD75 series universal Conveyor Belt Machine. The idlers
include grooved idlers, flat idlers, self-aligning idlers, etc. The
upper idler supporting the heavy section of the conveyor belt
adopts a grooved idler; the upper idler of the hand-selected
conveyor belt and the lower idler supporting the empty section of
the conveyor belt are all flat idlers; in order to prevent and
overcome the deviation of the conveyor belt, In the heavy-duty
section of the conveyor belt, set up a set of self-aligning idlers
or vertical idlers every 10 groups of grooved idlers.
Technical Parameters of Sand Conveyor Belt Machine
| Model | TD75-500 | TD75-650 | TD75-800 | TD75-1000 |
| Product size(mm) | Less than 300 |
| Belt | Width(mm) | 500 | 650 | 800 | 1000 |
| Speed(m/s) | 0.8-2.5 |
| Inclined angle(°) | 0-20 |
| Conveyor length(m) | 20-240 |
| Capacity(t/h) | 78-232 | 110-391 | 130-661 | 230-800 |
| Power(kw) | 3-18.5 | 5.5-37 | 5.5-45 | 7.5-110 |
Selection Conditions of Sand Conveyor Belt Machine
Handling capacity:_____
Material to be processed: _____
Bulk Density: _____t/m3
Material temperature: _____℃
Water content:____%
Material is corrosive or not: ____
Material is sticky or not: ____
Working environment temperature: ______ ℃
Working voltage:____V_____hz_____phase
Precautions for use of Sand Conveyor Belt Machine
The Conveyor Belt Machine needs to be run for idling before use. During the idling test run,
attention should be paid to whether there is any deviation of the
conveyor belt, the operating temperature of the transmission part,
and the flexibility of the idler during operation. At the same
time, necessary adjustments should be made, and the load running
test can be carried out only after each component is running
normally. During the test run with load, the tightness should be
adjusted again.
Conveyor Belt Machine should generally be started under no-load conditions. When several
belt conveyors are installed in sequence, a lockable starting
device should be used to start and stop in a certain order through
the centralized control room. In addition, in order to prevent
unexpected accidents, each conveyor should also be set with a local
start or stop button, which can stop any one individually. The
feeding of materials should be uniform and continuous, and overload
should be avoided; the frequent starting and braking of the
conveyor should be avoided as much as possible during the
production process.
