Fully Automatic Concrete Charcoal Rock Face Sleepers Machine Wet
Cast Machinery
Concrete charcoal rock face sleepers production process starts with
concrete mixing. A concrete mixer is used to combine cement,
aggregates (such as sand, gravel, or crushed stone), water, and
color additives. Charcoal color additives, such as pigments or
dyes, are added to achieve the desired color.Specialized moulds are
used to shape the concrete mixture into sleeper units. These moulds
are designed to replicate the desired dimensions and rock face
texture of the sleepers. The moulds can be made from rubber,
fiberglass, or other materials and are typically designed with a
rock face pattern to mimic the appearance of natural stone.The
colored concrete mixture is poured into the moulds, ensuring it
fills all the desired areas and details. The concrete should be
properly compacted to remove any air voids and ensure the
structural integrity of the sleepers.Once the concrete has cured
sufficiently, the moulds are removed, revealing the
charcoal-colored sleepers with a rock face texture. Care should be
taken during demoulding to avoid damaging the concrete.After
demoulding, any imperfections or rough edges on the sleepers can be
smoothed out using appropriate tools. Surface treatments, such as
sandblasting or acid etching, can be applied to enhance the rock
face texture and achieve the desired appearance.
Specification:
| Name | Model | Specification | Size(mm) | Power(Kw) | Capacity(m2/day) | Weight(Kg) |
| Wet Cast Machinery | HTX-P-01 | Hydraulic driving;Auto feeding; vibrating and timing feeding | 7000*1000*1800 | 12.7 | 1000-1500 | 2000 |
| Wet Cast Machinery | HTX-P-02 | Chain drived;Auto feeding,auto vibration | 8000*1100*1600 | 4.05 | 800-1000 | 1500
|
Applications
Wet cast machinery, is suitable for different silicone molds,
rubber molds and plastic molds, size range from 200*200mm to
1500*1500mm, available for producing the artificial stone both for
paving tile molds, 3D wall molds, wall panel molds, roadside stone
molds, retaining wall molds, wall cap molds, etc.
Support and Services
Wet Cast Machinery technical support and services include:
- On-site technical support and maintenance
- Expert assistance with installation and setup
- Remote and telephone troubleshooting and support
- Periodic maintenance and inspection
- Repair and replacement parts
- Technical training and user manuals
- Upgrades and software updates
