Straight bundles Fan-out bundles Simple and complex furcation
bundles Customized Glass Bare Fiber Optic Light Guide
Our high quality fiber optic bundles can be made with any fiber and
your choice of several configuration and construction
possibilities.
In addition, a number of connectors, including all standard
connectors—or custom ferrules, machined in-house—are available.
Hicorpwell ensures the highest quality and best transmission for
fiber optic bundles, while working within the boundaries of your
application.
In order to optimize your bundle, we take several parameters into
consideration: packing efficiency, fiber area efficiency,
Numerical Aperture optimization, fiber transmission, reflections, and an error factor
(which includes numerical aperture discrepancies).
Straight bundles
Straight bundles include one input and output. However, they could
be not as basic at they seem. Indeed in this configuration, bundles
can take a large number of geometries with linear, hexagonal,
round, array disposal etc. We can address each fiber independent of
I/O disposal. Main applications would be illumination and
excitation bundles, endoscopy, imaging systems, optical power
transportation or mere offset systems for spectroscopy signal
collection. Regarding the number of fiber and your application we
will set an optical connector, a capillary or a more complex
mechanical device.
Fan-out bundles
Fan-out bundles have to be seen like a common junction split from
two to numerous legs. Each leg will contain one fiber and is
customizable. Common junction is also of course designed regarding
your specification. On your side, the use of this kind of bundle is
multiple: gathering light sources for illumination or laser
pumping, multiple coupled detectors, sample cartography
Simple and complex furcation bundles
The main difference between Fan-Out and Furcation bundles resides
in the fact that you can set as many fiber as you want in each leg.
This makes the difference for reflection, fluorescence,
backscattering or Raman measurements where you need to illuminate
and collect independently. For this purpose we can add filters,
lenses or other terminations.
Application :
- Spectroscopy
- Sensors & Probes
- High power source
- Laser delivery
- Mono-chromators
- Reflective sensors
- Colorimetry
- Pyrometry
- Fluorescence
- Illumination
- Chemical analysis
Notes:
All bundles and assemblies are custom designed to meet your
specifications. All standard connectors (SMA 905, SMA 906, ST, FC)
are available—or custom ferrules, machined in-house to your
specifications.
We strive to ensure the accuracy of all information provided;
however, we imply no warranties and
disclaim any liability in connection with the use of this
information.
Refer to individual fiber data sheets for more information and to determine the best fiber for your application.
NA is measured at the 95% intensity angle.
Bundle size (core diameter) | 1.8mm/2.0mm/2.5mm/3.0mm /4.0mm (can be customized) |
| Cable Length | 3.5m / 4.0m / 4.5m / 5.0m (can be customized) |
| Bundle Type | Fused & Bonded |
| Sheath Type | Stainless Steel Monocoil Mesh Grid Silicone Goating |
| Available bulb type | LED/Halogen/Xenon |
| Adaptor compatible | Storz / Olympus / Wolf / Zeiss / Pentax |
