OEM Climatic Temperature Environmental Test Chamber For Testing
Material Dry Resistance
Constant Temperature Humidity Chambers can simulate the different
indicators of constant temperature and humidity climate quickly and
accurately for testing products which need to check their
performance of temperature testing (-40℃~+150℃), humidity testing
(20~98%R.H.),both of temerature and humidity testing at the same
time.chamber power can be customized.
Constant Temperature Humidity Chamber which also call environment
test chamber is designed for detecting the material under a variety
of environmental test equipment and performance of a variety of
materials holding test, cooling-off test, heating-up test,
moistening test and drying test... Suitable for electronic,
electrical, communications, instrumentation, vehicles, plastic
products, metals, food, chemicals, building materials, medical,
aerospace and other products quality testing purposes,EN 14511.
Application:
1000L Touch Screen Laboratory Equipment Constant Temperature
Humidity Climatic Test Chamber/Equipment/Machine/Cabinet is able to
simulate a wide range of temperature and humidity environment
condition for testing various products and components. It is widely
used for basic thermal cycling test and accelerated stress test. We
provide 6 standard models, test cabinet from 80L to 1000L,
customized size is also available.
| External dimension (W*D*H) | 600*1080*1380mm |
| Temperature range | -40~+150℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | 2℃ |
| Humidity range | 20~98%RH (Refer Image below) |
| Humidity fluctuation | ±2.5%RH |
| Humidity uniformity | 3%RH |
| Cooling speed | 1℃/min in average (without loading) |
| Heating speed | 3℃/min in average (without loading) |
| Internal chamber material | SUS#304 stainless steel, mirror finished |
| External chamber material | Stainless steel |
| Cooling method | Air cooling |
| Controller | LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
| Insulation material | 50mm high density rigid Polyurethane foam |
| Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe
heater |
| Compressor | France Tecumseh compressor |
| Lighting | Heat resistance |
| Temperature sensor | PT-100 dry and wet bulb sensor |
| Observation window | Tempered glass |
| Testing hole | Diameter 50mm, for cable routing |
| Sample tray | SUS#304 stainless steel, 2pcs |
| Safety protection device | Protection for leakage Over-temperature Compressor overvoltage and overload Heater short circuit Water shortage |
Optional Accessories of test chamber
1. Low humi. Dehumidifying system
2. Inner glass door with manual operating ports
3. Temp./ humi. Recorder
4. Pure water treatment device
5. Reverse osmosis water purifier
6. RS-485 interface can be linked to PC and achieve multi-level
control and recording software management.
7. LN2 / LCO2 fast cooling-down system
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Most of our machine is shipped with a whole part, which means it is
already installed, all you need to do is to connect the power cable
and start to use. And if possible, we can also install your machine
at site.
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
