SUS304 Laboratory Environmental Test Chamber Anticorrosive
Explosion Proof
product usage:
Temperature humidity test chamber is use to test material
heat,cold,dry resistance, humidity resistance.Suitable for
electronics, electrical appliances, communications,
instrumentation, vehicles, plastic products, metal, food, chemical,
building materials, medical, aerospace and other products.
Test Standard:
1. IEC - 529 dustproof test method
2. GB4208-93 dustproof test method
3. GB2423.37-89 dustproof test method
4. GJB150.12 dustproof test method
Chamber Design Features:
1, Chamber material: SUS#304 stainless steel;
2, Transparent window is convenient to observe specimen during
testing;
3, Blow fan adopts stainless steel shell, high sealing and wing
speed, low noise;
4, Inside the shell is the funnel type, vibration cycle can be
adjusted, dust free float in the sky falling to blowing the hole
together.
Specifications :
| Temperature Range | A:-0~150℃ B:-20~150℃ C:-40~150℃ D:-70~150℃ |
| Humidity Range | 20%RH-98%RH (details see temperature humidity control diagram). |
| Temperature Fluctuation | ±0.5℃ |
| Humidity Fluctuation | ±2%RH |
| Temperature Deviation | ≤2.0℃ |
| Humidity Deviation | A)>75%RH:≤+2,-3%RH,B)<75%RH:≤±5%RH. |
| Temperature Uniformity | ≤±2.0℃ |
| Humidity Uniformity | +2,-3%RH |
| Heating Rate | Approx 3℃/mins,average non-linear ,no load |
| Cooling Rate | Approx 1℃/ mins,average non-linear ,no load |
| Temperature Overshoot | ≤±2℃ |
| Internal Material | 1.2mm thick SUS#304 high &low temperature resistance stainless
steel. |
| External Material | Adopt flame retardant high strength PU Polyurethane foam insulation
material. |
| Control Method | Touch screen programmable PLC, with USB interface, with RJ485
interface can be connected to computer controlling, special network
control software, convenient remote monitoring, data
acquisitioning. |
Box structure:
1. The box body is processed and formed by CNC machine tools, with
beautiful appearance and non-reaction handle, which is easy to
operate.
2. The inner tank of the box is made of imported high-grade
stainless steel (SUS304) mirror panel, and the outer tank of the
box is sprayed with A3 steel plate, which increases the appearance
texture and cleanliness.
3. The water replenishment tank is placed in the lower right part
of the control box, and has automatic water shortage protection,
which is more convenient for the operator to replenish the water
source.
4. The large observation window is equipped with lights to keep the
inside of the box bright, and the tempered glass embedded in the
heating body is used to clearly observe the situation in the box at
any time.
5. The humidification system pipeline is separated from the control
circuit board, which can avoid failure due to water leakage in the
humidification pipeline and improve safety.
6. The water system pipeline circuit system is convenient for
maintenance and repair.
7. The box insulation adopts ultra-fine glass fiber insulation
cotton, which can avoid unnecessary energy loss.The left side of the box is equipped with a test hole with a
diameter of 50mm, which can be used for external test power lines
or signal lines.
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
