Stainless Steel Housing High And Low Temperature Liquid Thermal
Shock Test Chamber For Laboratory
Heater
1. Heat chamber:nickel-chromium alloy heater
2. Cooling chamber:nickel-chromium alloy heater
3. Control of heaters:SSR(solid-state relay)
Material
1. Material of inner chamber: SUS304 stainless plate. Thickness:
2.0mm
2. Material of bucket: SUS304 stainless
3. Insulation material: Rigid Polyurethane Foam + glass fiber
Feature:
1. Faster temperature change rate.
2. Quick temperature recovery, available for faster shock cycle.
3. Cable port available for data acquisition.
4. RS485 communication, Ethernet, available for computer remote
control
5. Programmable
Application:
For electrical, electronics and machine parts to cold test, the
temperature gradient through rapid changes in conditions or the
suitability test. Especially suitable for electrical and electronic
products, environmental stress screening options (ESS) test.
Specifications:
| Test zone size W*H*D(mm) | 200*350*300*2Bath | 260*350*450*2Bath |
| Test zone size W*H*D(mm) | 1140*1785*1240mm | 1200*1785*1320mm |
| Performance | Hot bath | Preheat temperature range | +80℃~+200℃ |
| Temperature fluctuation | ±2℃ |
| Temp.heat-up rate | Ambient temp.to+150℃ within 90min |
| Temp.pull-down rate | +150℃ to +60℃ within 60min |
| Cold bath | Precool temperature range | -65℃~0 |
| Temperature fluctuation | ±2℃ |
| Temp.heat-up rate | -65℃ to 0 within 60min |
| Temp.pull-down rate | Ambient temp.to -65℃ within 120min |
| System | Circulation system | Sirocco fan |
| Heating system | SUS#304 stainless steel high-speed heater |
| Cooling system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned
type evaporator,air(Water)-cooling condenser |
| Controller | TEMI990,8226,8227,8229 |
| Thermal shock range | -65.00℃~00.00℃/+600.00℃~150.00℃ |
| Testing time | 5min | 5min |
| Transfer time | Approximately 10 seconds |
| Temp.resolution | 0.1℃ / 1 min |
| Specimen Basket size(mm) | 100*180*200mm | 160*180*350mm |
| Specimen basket load capacity | 1C 2Kg | 1C 5kg |
| Controller | Color TFT LCD panel(6.5inch) |
| Power supply | AC 1Ψ 220V;3Ψ 380V 60/50Hz |
Service:
1. Device installation;
2. Equipment Operation Test Technology training;
3. Equipment Calibration;
4. Daily maintenance and maintenance of equipment
5 Free technical training for visiting factories
6 24-hour Online contact
7 Free software upgrades
More produced:
Temperature Humidity Test Chamber
Walk-in Aging Chamber
Environmental Test Chambers
Thermal Shock Chamber
Fast Temp. Change Test Chamber
Vibration Shaker
Environmental Vibration Chamber
Mechanical Shock Tester
UV Chamber
Xenon Chamber
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
