Textured / smooth HDPE geocell for retaining wall
HDPE Geocell
Geocell is a kind of three-dimensional network structure shaped by
high-strength HDPE (high density polyethylene) sheets through
ultrasonic welding of high strength. Currently, it is widely used
in construction, such as highway, railway, bridge, dyke, etc., the
honeycomb grid can be filled with various materials provides a
solution for erosion control, load support and earth retention
projects.
.
Features
1.Light weight, wear-resistant, chemical stability, light oxidation
aging, anti-acid/alkali corrosion, applied to different geological
conditions, such as saline soil, desert, etc.
2.Wide temperature range, high tensile strength, good rigidity and
toughness, good load capacity and anti-erosion ability.
3.Size is relatively stable, change the height and welding distance
can meet the needs of different projects.
4.Retractile, easy to transport.
5.Easy to use, can use the local materials and achieve rapid
construction, reduce construction costs.
Application
1.To stable the roadbed of highway/railway.
2.To bear the load of dyke, retaining wall.
3.To improve the watercourse of shallow river.
4.To support the pipeline and sewer.
5.To be used as independent wall, wharf and breakwater, etc.
6.To be used for the regulation of the desert, beaches, river bed
and river bank.
Methods used
In construction, the geocell can be pulled into a network and
launched into a three-dimensional honeycomb grid, then filled with
soil, macadam, concrete or other granular materials to constitute
to be a structure with strong lateral restriction and large
stiffness
Concrete construction method
1, Open the superimposed geocell.
2,Fixed with nails or connected with the framework of stretching
device.
3, Fill the particle filler until the full and beyond standard room
to the top, then vibrate or roll to finish the primary work.
4,At this point, cell chamber system can support all kinds of
construction equipment. The construction can be done directly in
the above.
Product Type | Height
(mm) | Welding Distance
(mm) | Thickness
(mm) | Tensile Strength of Welding Points (N/cm) | Tensile Strength of Connection of Cells(N/cm) | Tensile Strength at Yield of Each Sheet (Mpa) |
| 50≤H≤250 | 330≤A≤1000 | 1.0~1.2 | ≥100 | ≥120 | ≥20 |
| 50≤H≤250 | 330≤A≤1000 | 1.0~1.2 | ≥100 | ≥120 | ≥20 |
Textured and Not Perforated | 50≤H≤250 | 330≤A≤1000 | 1.5~1.7 | ≥100 | ≥120 | ≥20 |
| 50≤H≤250 | 330≤A≤1000 | 1.5~1.7 | ≥100 | ≥120 | ≥20 |
Remarks: 1. This is a basic technical specification. 2. All of the technical indexes can be reached according to the
customer's demand, and the other special standards will be carried
out by agreement or contact. 3. Our Geocell products have passed CE & GOST-R & SGS
certification. |
Remark
Above is just regular product data. We can do accroding to prjects'
requirments.
Product inventory:
