SFP+, 10Gbps, Bi-Directional, 10GBase-BX, SMF, Tx1270/Rx1330nm,
40KM
Generic 10G SFP+ BIDI TX1270/RX1330nm 40km
This SFP+ transceiver provides 10GBase-BX throughput up to 40km
over single-mode fiber (SMF) using a wavelength of
1330nmTx/1270nmRx via an LC connector.This easy to install, hot
swappable transceiver has been programmed, uniquely serialized and
data-traffic and application tested to ensure that it will
initialize and perform identically. Digital optical monitoring
(DOM) support is also present to allow access to real-time
operating parameters.
Product Features
• SFF-8432 and SFF-8472 Compliance
• Uncooled DFB transmitter and PIN receiver
• Simplex LC Connector
• Single-mode Fiber
• Hot Pluggable
• Excellent ESD Protection
• Metal with Lower EMI
• RoHS Compliant and Lead Free
Applications
• 10GBase-BX Ethernet
• 8x/10x Fibre Channel
• Access, Metro and Enterprise
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Differential data input swing | VIN,PP | 180 | | 700 | mVpp | 1 |
| Transmit Disable Voltage | VD | VCC-0.8 | | Vcc | V | |
| Transmit Enable Voltage | VEN | Vee | | Vee+0.8 |
| Input differential impedance | Rin | | 100 | | Ω | |
| Receiver |
| Differential data output swing | Vout,pp | 300 | | 850 | mVpp | 2 |
| Output rise time and fall time | Tr, Tf | 28 | | | Ps | 3 |
| LOS asserted | VLOS_F | VCC-0.8 | | Vcc | V | 4 |
| LOS de-asserted | VLOS_N | Vee | | Vee+0.8 | V | 4 |
Notes:
1. Connected directly to TX data input pins. AC coupling from pins
into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA
test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9
is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ
– 10kΩ on the host board. Normal operation is logic 0; loss of
signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1250 | 1270 | 1290 | nm | |
| 1310 | 1330 | 1350 | |
| Ave. output power (Enabled) | PAVE | 0 | | 6 | dBm | 1 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 5 | | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
| Dispersion penalty | TDP | | | 3.2 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | λ | | 1330 | | nm | |
| 1270 | | |
| Receiver Sensitivity | PSEN2 | | | -15 | dBm | 2 |
| Average Receive Power | PAVE | | | 0.5 | dBm | |
| Receiver Reflectance | Rrx | | | -12 | dB | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -18 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER=6; BER<10-12; 231 – 1 PRBS.
About Us:
Shenzhen Olinkcom offers a vast range of optical modules from
155Mbps ~ 100Gbps, including SFP, SFP+/XFP, QSFP+,
CFP/CFP2/QSFP28/CFP4, SFP28 and CWDM, DWDM solution with the
concept of "Quality First, Service Oriented, Realistic and
Innovative, Continuous Improvement", Olinkcom keep developing and
optimizing product design solution, to provide our valued customers
with most cost efficient product and service, as well as some
customized products.
