corrugated box printing machinecarton box printing machine
1, printing roller (plate roller)
(1), the outer diameter is φ292mm (including the outer diameter of
the plate is φ300mm).
(2), the surface of the steel pipe is ground and hard chrome
plated.
(3), do balance correction, and run smoothly.
(4) Loading and unloading the printing plate, the electric control
of the foot switch is reversed.
2, printing pressure roller
(1), the outer diameter is φ124mm.
(2), the surface of the steel pipe is ground and hard chrome
plated.
(3), do balance correction, and run smoothly.
(4) Manual adjustment of the printing roller gap dial, the
adjustment range is 0-12mm. 3, feeding the upper and lower rollers
(1) Upper roll: Thick-walled steel pipe with outer diameter of
φ71mm, equipped with four paper feed rings.
(2), lower roll: outer diameter of φ124mm thick-walled steel pipe,
surface grinding, hard chrome plating.
(3), the paper feed roller clearance dial is manually adjusted, the
adjustment range is 0-12mm. 4, steel anilox roller (optional Dalian
or Haili)
