Gigabit PoE Injector Adapter IEEE802.3at 30W support
10/100/1000Base-T
PoE Injector Advantages
► Up to 30W of PoE Power
► Compliant with IEEE802.3af/at Standard
► Support 10/100/1000Base-T
► Compliant with Limited Power Source (LPS)
► High Efficiency > 85%
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE
LED(Orange)
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet
Terminals
► Injects 48V DC through a CAT 5 cable, use all 2 pairs into remote
devices
Overview
LNK-POE300AT 30W – 48V Gigabit PoE Injector is a long-distance
driving, fast network performing,
strong PoE Output IEEE802.3af/at certified midspan. It is a single
port indoor PoE injector that can
provide up to 30W based on the IEEE 802.3af/at standard. The
midspans are ideal to power 802.11
access points, pan-tilt-zoom (PTZ) and dome cameras, IP
videophones, thin clients and other power
Ethernet end terminals with 30W of power. The solutions support
IEEE 802.3af/at powered devices and
are also backward compatible and safe to use with any IEEE
802.3af/at terminal. With plug and-play
installation, they are easy and cost effective to implement
leveraging existing Ethernet infrastructure
while at the same time providing the assurance of a future proof
network.
Technical Indexes
Ethernet |
Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet |
Processing Type: | Forward |
| Half-duplex, Full-duplex |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 10/100/1000Base-T: Cat5 or above |
Maximum Distance: | IEEE802.3af/at PoE (30W): 2-pair UTP Cat. 3, 4, 5, up to 100m
(328ft) |
Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320 C13 |
Environmental |
Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical |
Input Voltage Range: | 100-240V AC @50/60Hz. |
Output Voltage: | DC 48V |
Power Consumption: | 30 watts max. |
Application
Ordering Information
| Model | Description |
| LNK-POE300AT | PoE Injector with Power Cord: 10/100/1000Mbps, IEEE 802.3at 30W |
