1A1R Diamond Wheels 125mm Thickness 1mm For Tungsten Carbide
Cutting
Shine Abrasives 1A1R Diamond Wheels 5 Inch 125mm diameter For
Tungsten Carbide tools Precise Cutting
the cutting off wheels with Resin bond, the thickness is 1.0mm, the
wheels bore is 20mm.
It is mostly used for cutting or grooving common glass, glass rods,
glass mosaics,
ceramic plates, sapphire, stone grooving, semiconductor materials,
brake pads and other materials.
Drawing of Shine Abrasives 1A1R Diamond Wheels 125mm Thickness 1mm
For Tungsten Carbide Cutting
Main sizes form of Shine Abrasives 1A1R Diamond Wheels 125mm Thickness 1mm For Tungsten Carbide
Cutting
| Abrasive Material:Diamond | Bond Type:Resin |
| Diamond Grit:D151 | Wheel Diameter: 6nch 150mm |
| Wheel Bore:31.75mm | Rim width:7mm |
| Wheel Thickness:1.0mm | Wheel core: Steel |
Other standard sizes also are available as requested.
Features of Shine Abrasives 1A1R Diamond Wheels 125mm Thickness 1mm For Tungsten Carbide
Cutting
cutting process, low calorific value, good self-sharpening, not
easy to block, high surface finish of the processed workpiece.
Application: It is used for cutting or grooving hard and brittle
materials such as optical glass, glass tube, glass rod, quartz
glass, glass fiber, semiconductor, cemented carbide, ceramic,
zirconia ceramic, circuit board (PCB).
Application picture for reference.
Attention:Workers should ensure that you are fully informed on the
safe operation of abrasive cutting and grinding wheels
