1A1R Diamond Wheels 150mm For Tungsten Carbide Cutting And Slotting
Shine Abrasives 1A1R Diamond Wheels 150mm For Tungsten Carbide Cutting And
Slotting
the cutting off wheels with Resin bond, the thickness is 1.0mm, the
wheels bore is 31.75mm.
Wheels work on the usual cutting machine.
Cutting for carbide bars or slotting for tool-maker.
Best for tool makers spplication.
Wheels can work for wet or drying working, wet cutting or slotting
are preferred.
Drawing of Shine Abrasives 1A1R Diamond Wheels 150mm For Tungsten Carbide Cutting And Slotting
Main sizes form of Shine Abrasives 1A1R Diamond Wheels 150mm For Tungsten Carbide
Cutting And Slotting
| Abrasive Material:Diamond | Bond Type:Resin |
| Diamond Grit:100# | Wheel Diameter: 150mm |
| Wheel Bore:31.75mm | Rim width:5mm |
| Wheel Thickness:1.0mm | Wheel core: Steel |
Other standard sizes also are available as requested.
Features of Shine Abrasives 1A1R Diamond Wheels 150mm For Tungsten Carbide
Cutting And Slotting
Good cutting speed.
Strong wheel body for Good flatness, no vibration when wheels are
working.
No crash happen when cutting or slotting.
Cost-efficient.
Application picture for reference.
Attention:Workers should ensure that you are fully informed on the
safe operation of abrasive cutting and grinding wheels
