12 Inch Ductile Iron GGG50 Sliding Ball Check Valve With Epoxy
Powder Coating
Description:
| Technical Parameters |
| Model | PN(MPa) | Casting test pressure(MPa) | Seal test pressure (MPa) | Materials of body, bonnet |
| HQ41X-10 | 1 | 1.5 | 1.1 | iron or steel |
| HQ41X-16 | 1.6 | 2.4 | 1.76 |
| | | | |
| Mail part & material |
| Body : Cast iron, ductile cast iron ,WCB |
| Bonnet : Cast iron, ductile cast iron, WCB |
| Ball : cast steel coated with neoprene |
| Medium : water and weak corrosive fluid |
Applications:
Flanged Ball Check Valve uses the rubber covered roller as the
disc, when, under the action of the
medium, can roll up and down along with the integral sliding path
inside the valve so as to open or
close it.
And it features by good tightness, silent close and no production
of water hammer.
The body is full waterflow path design, big flow, small resistance
and the water head loss is smaller
that of the swing type by 50.
It is mountable vertically or horizontally and can be used for cold
water, hot water, industrial and
living sludge pipe networks, especially suitable for the
submersible sludge pump.
The medium temperature:0~80℃.
| Dimensions | | | | | | |
| DN(mm) | L | D | D1 | D2 | Z-φd | H |
| 50 | 180 | 160 | 125 | 100 | 4-18 | 185 |
| 65 | 200 | 180 | 145 | 120 | 4-18 | 210 |
| 80 | 260 | 195 | 160 | 135 | 4-18/8-18 | 245 |
| 100 | 300 | 215 | 180 | 155 | 8-18 | 280 |
| 125 | 350 | 245 | 210 | 185 | 8-18 | 335 |
| 150 | 400 | 280 | 240 | 210 | 8-23 | 400 |
| 200 | 500 | 335 | 295 | 265 | 8-23/12-23 | 495 |
| 250 | 600 | 390/405 | 350/355 | 320 | 12-23/12-25 | 600 |
| 300 | 700 | 440/460 | 400/410 | 375 | 12-23/12-25 | 715 |
| 350 | 800 | 500/520 | 460/470 | 435 | 16-23/16-25 | 820 |
Check Valve - Ball type (nonreturn valve) was the first valves at
with a unique design. A very simple
but robust design with no critical mechanism involved.
All parts like hinge pin disc mechanism used in conventional valve
are eliminated, and has put in a
reinforced rubber coated ball to arrest flow media in return
condition.
This ball, moves totally out of the flow path when the pumping is
on to give minimum head losses.
The spherical rubber coated ball seals perfectly on the rounded
valve seat ensuring a totally leak proof
sealing.
This design offers other advantages like non clogging & self
cleaning. In this virtually maintenance free
valves, if required, after prolonged usage, the on-line replacement
of the ball is just a minute job.
* Lower power consumption
* Larger solid handling capacity
* Self cleaning, Non-Clogging
* Perfect Sealing
* Low pressure drop
Principle:
The heart of this valve is a reinforced rubber ball. The unique
design of the valve allows free movement of the ball.
The ball moves to open position when the pump starts & allows free
flow of liquid without any interference (See Fig.).
As the pump stops, the ball seats firmly against the metal seat due
to its own weight & back pressure of
the liquid (Mouse over fig.). This results in DROPLESS sealing.
Part List / Materials of Construction
| Part | Description | Standard | Special |
| 1. | Body | Cast Iron | St. Steel, Cast Steel |
| 2. | Cover | Cast Iron | St. Steel, Cast Steel |
| 3. | Ball | Nitrile Reinforced | EPDM, Neoprene |
| 4. | Cover Ring | Nitrile Rubber | Butyle, Viton |
| 5. | Ball Seat Ring | L. T. Bronze | St. Steel, Hard Rub. |
| 6. | Fasteners | Carbon Steel | St. Steel |
Detailed Product Description
| Product Name: | Disco Check Valve | Application: | Water , Oil, Gas, Etc., |
|---|
| Size: | DN15 ~ DN300 | Pressure: | PN16~PN40, 150 Lbs ~ 600lbs |
|---|
| Standard: | API 6D/ ANSI 16.5 B/ JIS 20K/JIS 10K /DIN | Temperature: | -10~80 C |
|---|
| Body: | SUS304 / 316 | Seat: | CF8 / CF8M |
|---|
| High Light: | stainless steel ball check valve,vertical ball check valve |
|---|
CF8 PN40 Wafer Disco Check Valve For Petroleum Or Vapour , SUS304
Single Disc
Application:
Valve is used for preventing the back-going of medium in pipelines
and equipments, and the pressure
of medium will bring the result of opening and closing
automatically.
When the medium is back-going, valve disc will automaticaly closed
to avoid accidents.
| Specification: |
|
| pressure | PN(MPa) | |
| 1.6 | 2.5 | 4 | |
| Strength | 2.4 | 3.8 | 6 | |
| seal | 1.8 | 2.8 | 4.4 | |
| Body | WCB(C) | CF8(P) | CF8M(R) | |
| temperature | ≤425 | ≤100 | ≤100 | |
| Medium | water,steam,oil | nitric acid | acetum | |
| Deminsion: |
|
| DN(mm) | L | D |
| 1.6 | 2.5 | 4 |
| 15 | 25 | 48 | 48 | 48 |
| 20 | 31.5 | 58 | 58 | 58 |
| 25 | 35.5 | 68 | 68 | 68 |
| 32 | 40 | 80 | 80 | 80 |
| 40 | 45 | 90 | 90 | 90 |
| 50 | 56 | 105 | 105 | 105 |
| 65 | 63 | 125 | 125 | 125 |
| 80 | 71 | 140 | 140 | 140 |
| 100 | 80 | 160 | 165 | 165 |
| 125 | 110 | 190 | 195 | 195 |
| 150 | 125 | 215 | 225 | 225 |
| 200 | 160 | 270 | 285 | 290 |
| 250 | 200 | 330 | 340 | 350 |
| 300 | 250 | 385 | 400 | 415 |
| material: | | | |
| NO | parts | qty | material |
| 1 | body | 1 | 316 |
| 2 | O-ring | 2 | EPDM |
| 3 | disc | 1 | 316 |
| 4 | O-ring | 1 | EPDM |
| 5 | eye bol | 1 | 316 |
| 6 | small cover | 2 | 316 |
| 7 | pin | 1 | 316 |
| 8 | retainer screw | 2 | 316 |
| 9 | big cover | 2 | 316 |
| 10 | bolt | 2 | 316 |
| 11 | spring | 1 | 316 |
◆deminsion:
| DN | PN10.PN16 | PN25 | PN40 |
| A | B | C | D | E | L | G | A | B | C | D | E | L | G | A | B | C | D | E | L | G |
| 40 | 94 | 16 | 22 | 81.4 | 25 | 195 | 0 | equal PN10 | equal PN10 |
| 50 | 109 | 16 | 32 | 94 | 33.6 | 208 | 1 |
| 65 | 129 | 17 | 40 | 111 | 46 | 230 | 2 |
| 80 | 144 | 17 | 54 | 123 | 56.5 | 245 | 3 |
| 100 | 164 | 18 | 70 | 147 | 71.4 | 265 | 3 | 168 | 18 | 70 | 149 | 71.4 | 269 | 3 | Equal PN25 |
| 125 | 195 | 18 | 92 | 171 | 87.3 | 297 | 5 | 194 | 18 | 92 | 171 | 87.3 | 296 | 5 |
| 150 | 220 | 20 | 112 | 200 | 106.6 | 321 | 5 | 224 | 20 | 112 | 202 | 106.6 | 325 | 5 |
| 200 | 275 | 22 | 154 | 256 | 148.2 | 376 | 5 | 284 | 22 | 154 | 265 | 148.2 | 385 | 5 | 291 | 22 | 154 | 268 | 148.2 | 392 | 5 |
| 250 | 331 | 26 | 192 | 302 | 185.2 | 436 | 6 | 342 | 26 | 192 | 307 | 185.2 | 447 | 6 | 353 | 26 | 192 | 312 | 185.2 | 458 | 6 |
| 300 | 380 | 32 | 227 | 352 | 216.3 | 484 | 10 | 401 | 32 | 227 | 360 | 216.3 | 499 | 10 | 418 | 32 | 227 | 368 | 216.3 | 516 | 10 |
| 350 | 446 | 38 | 266 | 408 | 254 | 548 | 12 | 458 | 38 | 266 | 412 | 254 | 560 | 12 | 475 | 38 | 266 | 422 | 254 | 577 | 12 |
| 400 | 498 | 44 | 310 | 460 | 294.4 | 603 | 14 | 515 | 44 | 310 | 463 | 294.4 | 620 | 14 | 547 | 44 | 310 | 484 | 294.4 | 652 | 14 |
| Specification | | | | | |
| 1 | Face to face according to DIN3202-K3. |
| 2 | Flange drilling according to ANSI125/150;DIN2501PN10/PN16;AS2129
Table E;JIS10K ect. |
| 3 | Working Pressure: PN10;PN16 |
| Main Parts and Materials |
| Number | Part Name | Material |
| 1 | Body | GGG50 |
| 2 | Disc | SS304 |
| 3 | Stem | SS304 |
| 4 | Spring | SS304 |
| 5 | Washer | PTFE |
| 6 | Washer | PTFE |
| 7 | Gasket | NBR |
| 8 | Hex nut | A193A |
| Main Dimensions |
| DN | D | D1 | D2 | L | R | t |
| 50 | 107 | 65 | 40 | 43 | 27 | 18.4 |
| 65 | 127 | 80 | 60 | 46 | 35 | 19.8 |
| 80 | 142 | 94 | 70 | 64 | 42 | 27.7 |
| 100 | 162 | 117 | 88 | 64 | 50 | 27.7 |
| 150 | 218 | 171 | 134 | 76 | 77 | 31.6 |
| 200 | 273 | 224 | 182 | 89 | 102.5 | 32.9 |
| 300 | 378 | 310 | 260 | 114 | 146 | 43.3 |
| 350 | 446 | 360 | 298 | 127 | 170 | 45.3 |
| 400 | 488 | 410 | 350 | 140 | 195 | 52.3 |
| 450 | 546 | 450 | 385 | 152 | 215 | 58.2 |
| 500 | 594 | 505 | 438 | 152 | 238 | 58.3 |
| 600 | 700 | 624.5 | 538 | 178 | 292 | 74.6 |
| 700 | 820 | 720 | 662 | 229 | 345 | 96 |
| 800 | 930 | 825 | 762 | 241 | 394 | 99 |
Standards
Design and manufacture as BS1868, ANSI B16.34
Face to face dimensions as ANSI B16.10
End flange dimension as ANSI B16.5
Pressure-temperature ratings as ANSI B16.34
Pressure test as API 598
Applicable Medium: water ,gas,oil,and other causticity medium.
Test Pressure
| Test Item | Shell Test | Seal Test | Back Seal Test | Air Seal Test |
| Medium | Water | Air |
| Unit | MPa | lbf/in2 | MPa | lbf/in2 | MPa | lbf/in2 | MPa | lbf/in2 |
| Pressure (Class) | 150 | 3.1 | 450 | 2.2 | 315 | 2.2 | 315 | 0.5-0.7 | 60-100 |
| 300 | 7.8 | 1125 | 5.6 | 815 | 5.6 | 815 |
| 400 | 10.3 | 1500 | 7.6 | 1100 | 7.6 | 1100 |
| 600 | 15.3 | 2225 | 11.2 | 1630 | 11.2 | 1630 |
| 900 | 23.1 | 3350 | 16.8 | 2440 | 16.8 | 2440 |
| 1500 | 38.4 | 5575 | 28.1 | 4080 | 28.1 | 4080 |
