4 Port Industrial Fiber Switch Gigabit Poe Switch IP Camera For
CCTV System
Introduction of Industrial Fiber Switch
IM-FP244GE series is the 10/100/1000 Mbps industrial POE fiber
switch, comply with IEEE802.3af/at, power on POE IP cameras through
the Ethernet cable, simple construction, power range up to 100
meters, operating temperature -40 ℃ to + 75 ℃, meet IP40 protection
degree and EMC industrial grade requirements, DIN rail
installation, pass through dangerous environmental certification
and comply with FCC and CE standards. The reliable industrial grade
design could ensure continuous and stable operation of the
automation system.
Specification of Industrial Fiber Switch
| Product Name | 10/100/1000Mbps Industrial POE Fiber Switch (2F+4TP) |
| Model No. | IM-FP244GE |
| Port | 2x 1000Mpbs SFP ports SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode: storage and forward System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M
Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 unshielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~4) (802.3at standards required special instructions) |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration: IEC 60068-2-6 Freefall: IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic: EN 50121-4 |
| Safety | CE Mark, commercial CE/LVD EN60950 |
| Mechanical information | Shell: Corrugated metal shell Safety class: IP40 Dimension:158 x 114.8 x 60mm Mounting method: Din-rail mounting |
| Warranty | 3 years |
Product Details of Industrial Fiber Switch
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Max power to15.4W under af standard, 30W under at standard to each
PoE port
- Detect the PoE models of electrical equipments.
FAQ of Industrial Fiber Switch
Q: Is this the standard POE?
A: Yes, we support IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
Q: What is the warranty time?
A: One year for HD video optical converter, normal switch, fiber media
converter, network booster. Three years for industrial fiber switch and SFP transceiver.
Lifetime repair service is provided.
Q: Do you provide OEM service?
A: Yes, we provide OEM service. If you have requirements about the
customized product, we also provide it.
Application of Industrial Fiber Switch
Photo of Industrial Fiber Switch
