Phoenix Air Spring SP 1 B 04 Continental Bellows Style Single
Convoluted Bags
AIRSUSTECH 1B4060 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH Part Number:1B4060
Phoenix Part Number:SP1B04
Phoenix Part Number:SP 1 B 04
Phoenix Part Number:SP1 B 04
Phoenix Part Number:SP1B 04
Contitech Part Number:FS 40-6
Contitech Part Number:FS 40-6 G1/8
Contitech Part Number:FS40-6
Contitech Part Number:FS 40-6 G1/8 M8
Continental Part Number:FS 40-6
Continental Part Number:FS 40-6 G1/8
Continental Part Number:FS40-6
Continental Part Number:FS 40-6 G1/8 M8
AIRSUSTECH 1B4060 replace Phoenix Air Spring SP 1 B 04product
description:
The air spring shock absorber AIRSUSTECH 1B4060 replace Phoenix Air
Spring SP 1 B 04can only push the bellows towards the workpiece,
otherwise it must be equipped with a stroke limiter at the end of
the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 1B4060
replace Phoenix Air Spring SP 1 B 04to the minimum height, a
restoring force is required. Usually, this is achieved by applying
a load
• The entire bearing surface of the upper and lower plates of the
air spring shock absorber AIRSUSTECH 1B4060 replace Phoenix Air
Spring SP 1 B 04must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH
1B4060 replace SP1B04 Phoenix, the internal air must be released to
prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH
1B4060 replace Phoenix Air Spring SP 1 B 04shall not be in contact
with other parts
Technical performance parameter list of AIRSUSTECH 1B4060 air spring:
Bearing
load
Power
(kg) | Inflation pressure | 0.2MPa | 0.3MPa | 0.4MPa | 0.5MPa | 0.6MPa | 0.7MPa | 0.8MPa | 0.7MPa
Volume(dm³) |
|---|
| Installation height | | | | | | | |
|---|
| 53(mm) | 230 | 341 | 448 | 559 | 681 | 793 | 915 | 0.339 |
| 66(mm) | 180 | 277 | 366 | 468 | 560 | 656 | 750 | 0.523 |
| 70(mm) | 159 | 251 | 337 | 422 | 511 | 601 | 690 | 0.557 |
| 79(mm) | 146 | 225 | 297 | 369 | 438 | 519 | 587 | 0.623 |
| 83(mm) | 120 | 177 | 253 | 294 | 357 | 417 | 489 | 0.629 |
| 92(mm) | 69 | 103 | 138 | 174 | 214 | 253 | 296 | 0.688 |
| Stiffness and frequency at design height | Vertical stiffness(Kg/cm) | 90 | 128 | 165 | 206 | 248 | 290 | 304 | |
| Stiffness and frequency at design height | Natural frequency Hz | 3.78 | 3.58 | 3.5 | 3.49 | 3.49 | 3.48 | 3.32 | |
| Stiffness and frequency at design height | Natural frequency cpm | 227 | 215 | 210 | 209 | 209 | 209 | 199 | |
| Technical data of AIRSUSTECH 1B4060 replace SP1B04 Phoenix |
| Min. pressure | 0 bar |
| Return force to min. height | ≤ 120 N |
| Overall weight with clamped plates | 0.9 kg |
| Vibration isolation - dynamic characteristic values of AIRSUSTECH 1B4060 replace SP1B04 Phoenix |
| Design height H: recommended 90mm, minimum 70mm |
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force (Load) [KN] | 1.7 | 2.3 | 2.8 | 3.4 | 3.8 | 4.4 | 0.5 |
| Spring rate [N/cm] | 760 | 990 | 1220 | 1480 | 1610 | 1820 |
| Natural frequency [Hz] | 3.5 | 3.3 | 3.3 | 3.3 | 3.2 | 3.2 |
| Pneumatic application - static characteristic values of AIRSUSTECH 1B4060 replace SP1B04 Phoenix |
| Force F [kN] |
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Height H [mm] 60 | 2.6 | 3.5 | 4.3 | 5.2 | 6.1 | 6.9 | 0.3 |
| 70 | 2.3 | 3.2 | 3.9 | 4.7 | 5.4 | 6.2 | 0.4 |
| 80 | 2.1 | 2.8 | 3.5 | 4.2 | 4.9 | 5.3 | 0.5 |
| 90 | 1.7 | 2.2 | 2.8 | 3.4 | 3.9 | 4.4 | 0.5 |
| 100 | 1.2 | 1.6 | 2 | 2.5 | 3 | 3.4 | 0.6 |
