SOOSAN STANLEY NPK Hydraulic Hammer Chisels Impact Part Wedge
Chisel
(1) What are the right methods to install hydraulic hammer chisels?
The methods of installing hydraulic hammer chisels are as below:
1. Put the hydraulic breaker hammer on the ground first, preferably
with two sleepers underneath
2. Buckle off the plug on the side of the stop pin
3. Use a thin iron rod to smash out the stop pin
4. The flat pin can be taken out when the stop pin is removed
5. Pull out the old drill rod directly
6. Put some butter on the head of the new drill rod and insert it
into the bushing.
7. Then install flat pins, stop pins and plugs in sequence.
8. Finally, fill some butter.
(2) Main specifications of hydraulic breaker hammer chisels
| Brand | HANYUN |
| Breaker chisel model | HYQG135 |
| Chisel diameter | 135mm |
| Chisel weight | 125kgs |
| Chisel length | 1300mm or customized length |
| Applicable carrier weight | 19-23T |
(3) What are advantages for Hydraulic breaker hammer chisels from
Hanyun?
Hanyun is a leading manufacturer of hydraulic hammer chisesls from
China, we produce and export large
quantity of breaker drill rods and hydraulic breaker hammers each
year, main features are as below:
1. High-strength wear-resistant round steel 40CRMO/42CRMO;
2. Advanced self-own heat treatment and cooling technology. Using
segmented quenching, it is not easy to
break when using steel drill rod
3. Stable quality and strong crushing force, the hardness of the
hammer tip is about 55 degrees, the hardness
of the flat pin is about 48 degrees, and the hardness of the tail
is about 45 degrees;
4. Multi-purpose with one hammer, economical and efficient, long
service time;
5. Fast delivery in batches, support customization
