PoE Injector Splitter 12VDC Output Voltage 2-Port Data Output PoE
Splitter
PoE Injector Splitter Advantages
► Splits power and data from PoE Input
► 1-port PoE Power+ Data input
► 2-port Data output (Switch function)
► 1 DC Out + 1 DC In (5-pin Terminal Block)
► Able to work with 12VDC input no PoE
► Support IEEE802.3af/at PoE
► Support 10/100/1000Base-TX
► Distance up to 100 meters
► 12VDC output voltage
Technical Indexes
| Maximum Distance: | Cat5 UTP up to 100m |
| Interface: | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T |
| “Data” Out Port: 2 x RJ-45 10/100/1000Base-T |
| DC Out/In Plug Connector: 1 removable 5-Pin terminal block |
| Power over Ethernet |
| PoE Standard: | IEEE 802.3af/at Power over Ethernet |
| Number of devices that can be powered: | 1 (DC12V) (Vary on device’s power requirement; cannot be over 20 watts.) |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Power Output: | 20W 12VDC (Terminal Block) |
| Power Consumption: | 25W Max. |
| LED Indicators: |
| PWR: | Power ON |
| POE/12V: | PSE Power IN, 12VDC Power OUT |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.25Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500V |
| ESD: 4KV/8KV |
Overview
LNK-SPL01 series is an Industrial Grade, Gigabit Ethernet, PoE
Splitter, designed to deliver data, via RJ-45 Ethernet connector,
and electrical power, via screw terminal block, to non-PoE devices.
This device saves the high cost of running separate electrical
service to edge devices.
The LNK-SPL01 acts as PD equipment and can be powered by standard
PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work
when paired with LNK-INJ301 PoE Injectors. The data transmission,
up to Gigabit speeds, with power output voltages of 12VDC, run
simultaneously up to the Ethernet limit of 100 meters. Simple
settings of the LNK-SPL01, make it a plug and play device,
requiring no tools or software configuration, and provides ease of
use, with flexible installation and high reliability.
With 2-port RJ45 data output, LNK-SPL01 can be function as switch.
With dual power input (PoE input + 12VDC input), the PoE splitter
can work when there is no PoE input, that is to say, LNK-SPL01 can
automatically recognize the power input (default in PoE input,
switch to 12VDC input when PoE not work).
Ordering Information
| Model | Description |
| LNK-SPL01 | Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In
+ 2-port Ethernet Data Out (switch function), maximum output of 20
W at 12VDC, Support DIN-Rail mounting and Wall mounting
installation, -40 to 80°C operating temperature |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
| Power Options | ► 20W 12VDC output with 2-pin open wire terminal block |
