Downspout Carbon Steel Elbow Hot Inducton Heting Forming Machine
Downspout Carbon Steel Elbow Hot Inducton Heting Forming Machine is primarily used for producing a variety of arm joints in 1D-2.5
D. We might develop as well as produce automated or manual kind
according to your demand.
Highlight:
1) It recognizes hydraulic opening as well as closing of the push
entrance.
2) Making use of BCT shut cooling system, soft water as cooling
medium, not scaling, not obstructing pipe, reduced malfunction.
3) The main valves use international standard Rexroth major
products, magnetic valves utilize secure DC 24V managing.
4) The hydraulic pump terminal embrace full closed framework, no
leakage, with auxiliary and major fuel storage tank, very easy in
upkeep.
5) Digital sign set up in the operation workdesk, keeping an eye on
operation temperature level and also hydraulic stress.
6) Electric components adopt Siemens or Schneider items.
| Elbow size | outer diameter Φ25mm(1″)~Φ1420mm(56″) |
| Wall thickness | 5~120mm |
| Bent diameter | ≤3 |
| Bent degree | 22.5°,45°,90°,135° etc. |
| Hydraulic cylinder | 2/4sets |
Downspout Carbon Steel Elbow Hot Inducton Heting Forming Machine can produce butt welded elbows: 1. The range of the size is OD: 1
inch (25mm)- 60 inches (1420mm); Thickness: 5mm – 120mm; Angle:
22.5 degree 45 degree 90 degree 135 degree and the angle of user
needs 2. Butt welded elbow machine is composed by: Hydraulic main
pushing machine, hydraulic pump, operate panel, control panel of
generators, medium frequency, compensating capacitor, water cable,
induction coils adjust frame, reactor.
We also supply:
Tee cold forming machine, Long Bends Elbow Induction Heating
Bending Elbow Making Machine, induction tube bending machine, elbow
chamfer machine, tee beveling machine, reducer beveling machine,
pipe&tube processing machine, pipe end facing machine, die
mould and mandrills, pipe fittings.
