Welding Induction Heating Apparatus Equipment , Induction Heaters
1-10khz
Advantages of Induction Heating Equipment:
1. Fast heating: the minimum rate of heating is less than 1 second
(rate of heating is available for adjustment and control).
2. Wide coverage of heating: it can be used to heat various metal
parts (replace removable induction coil as per different operating
switches).
3. Easy installation: it can be used once it is connected with power source, induction coil as well as
water supply pipe and rising pipe; it is small in size and light in
weight.
4. Easy operation: you can learn to operate it within several
minutes.
5. Fast start-up: it can be started to perform heating operation on
condition that water and power supply is available.
6. Low power consumption: As compared with conventional vacuum tube
high frequency equipments, it can save the power by approximately
70%. The smaller the size of the work piece is, the lower power
consumption would be.
7. High effectiveness: it has such features as uniform heating (it
is applicable to adjust the spacing of the induction coil to ensure
the appropriate temperature as required by each part of work
piece), fast warming and limited oxic horizon, and can guard
against any waste after annealing.
8. Comprehensive protection: it has such functions as overpressure,
over-current, overheat and water shortage alarm indications as well
as automatic control and protection.
9. Controllable temperature: it is applicable to control the
temperature for heating work pieces as per the preset heating time,
and thereby control the heating temperature at a certain technical
point.
10. Comprehensive full load design: it can work continuously for 24
hours.
11. Small size and light weight: it has a weight of only several
dozens of kilograms, of which, the limited floor space can
effectively save the workshop space.
12. Elimination of high voltage: it requires no step-up transformer
which may produce approximately ten thousand voltage, and thus can
ensure the maximum safety.
Technical parameters of medium frequency induction heating equipment:
Item Model | ZP-150 |
| Rated Voltage(V) | 380V/50Hz |
| Input Power(kVA) | 5~120 |
| Input Oscillation Frequency(kHz) | 3~19 |
| Load Duration | 100% |
| Cooling Water Pressure(Mpa) | 0.25~0.4 |
| Output Water Flow(L/Min) | 35~50 |
Our Services about induction heating machine:
Pre-sale service:
We will recommend the most suitable machine for customers according
to their requirements
In-sale service:
(1) We will strictly manufacture the machine according to relevant
technical standards.
(2) We will take run test according to relevant equipment test run
regulations.
(3) We will strictly check up the machine, before delivery, only
good machine will be sent to customers.
(4) We will delivery on time.
After-sale service:
(1) We will be free to guide the installation, commissioning and
test run, by sending the installation drawings, and sometimes to
call or send e-mail.
(2) We will carry out a one-year warranty period (e.g. excluding
normal wear and tear parts and parts damage compensation caused by
improper operation.
(3) We will be free to replace all equipment components during
warranty period. The potential problems of customer service and
customer service after sales.
(4) Provide long term technical support. Also for different work
pieces, to guide and help to produce the inductor.
Applications of induction heating machine:
