65Mn steel crimped wire mesh for sieving
65Mn crimped wire mesh is one of the most commonly used mining
screens in mining, mineral processing, quarrying and agglomeration
industries. Adding a certain amount of manganese to carbon steel
can improve and increase the wear resistance of steel, making it
more suitable for use in high-strength working environments such as
ore screening in mining.
The mining screen is usually made of 65Mn wire and crimped to form
a precise square opening for maximum rigidity. 65Mn material has
the highest manganese content and high carbon content, so it has
better wear resistance and tensile strength than other materials.
Even if the surface is subject to strong impact and abrasion, the
interior still maintains high plasticity and toughness. When the
surface is worn or torn, it will forma new layer against wear.
Therefore, 65MN crimping wire mesh is an ideal mesh selection for
mining and quarrying industries.
We produce 65Mn steel crimped wire mesh, the mesh range is from
3mm-300mm, and the steel wire diameter ranges from 2mm-12mm. The
width ranges from 0.3 meters to 5 meters. It can be made into a net
sheet or a net roll. If it is made into a net roll, the length is
usually no more than 30 meters. In fact, we can also produce
longer, but if it is too long, the entire roll of crimped mesh will
be very heavy, and it is very inconvenient to handle and use.
65Mn steel crimped wire mesh Features
Abrasion resistance
High impact resistance
High-temperature resistance
High tensile strength and toughness
Long service life
