Self Cleaning and Non Clogging Wedge Wire Sand Control Screens
Products Quickly Details:
1. Product Name: Johnson V Wire-Wound Strainer Sand Control Screen Pipe, v wire water well screen, wire wrapped screen pipe, Johnson
specialty screen, spiral screen tube, strainer pipe, rod based
continuous slot wedge wire screen, drilling well screen, reversed
rolled slot well screens, screen cylinders, continuous-slot well
screen, Well screen, water filter, filtration element
2. Material : Low carton, mild steel wire, iron wire, low carton
galvanized steel (LCG), stainless steel (201, 205, 304,316, 316L, 321 etc.), Duplex stainless steel
3. Diameter: DN 20-1000mm (1-40inch)
4. Slot size:
0.05mm,0.08mm,0.1mm,0.15mm,0.20mm,0.25mm,0.30mm,0.50mm,0.75mm,1.0mm...
6.00mm also achieved upon request.
5. Length: 500mm,1000mm,1500mm,2000mm,..... ,6000mm.
6. End connection: Plain beveled ends for butt welding (welded
ring)or threaded male &female coupling (API STC, PT NPT, BSP, G, ).(spiral), Flange, Closed up
7. Surface Electrolytic polishing, Pickling and polishing or
Galvanized
Wedge wire Sand Control screens, a rod-based wire wrapped screen
features the largest open area compared with either slotted liner
or pipe-based screen. Versatile wedge wire screens can be found in
a great number of well applications, such as rude oil production,
natural gas production, vessel internals and ground water
exploration and so on.
Rods spaced evenly around the circumference support the screen and
prevent the screen from deformation.
V-shaped wire produces self-cleaning action and non-clogging
performance. The slot width on surface is increasing towards the
internal side of the screen. This slot geometry is called keystone
slot which has the ability of anti-plugging. Precise slot width
should be designed to satisfy operation requirements. Usually, the
slot width is two times the size of the formation sand.
End fittings can be customized to secure the screen body.
Materials: Wedge wire Sand Control screens
Wedge wire Sand Control screens are usually fabricated by stainless
steel 304 and 316L, low carbon steel, galvanized steel. However,
optional temperature is another important element to be considered.
So, wedge wire screens made of other materials are including
Hastelloy C, Duplex stainless steel
Design: Wedge wire Sand Control screens
Wedge wire Sand Control screens can be manufactured into diverse
slot widths and configurations depend on applications. Slot widths
come in diverse sizes from 0.05mm (50 microns) to 10mm.
Custom wedge wire Sand Control screens can be manufactured. Length,
width, spacing of profile wire can be engineered to meet required
service conditions.
Packaging & Delivery: Wedge wire Sand Control screens
With plastic film or buble package with weave bag, then packed in
wooden boxes or container
Plastic bubble bag packaging
Transparent plastic bag inside, woven bag outside
Wooden box
Pallet
According to your requirment.
Wedge Wire Sand Control Screen Pipe Data reference table:
sizes
(inch) | OD
(mm) | slot
(mm) | Length
(m) | Tenslile
strength | collapse
Strength | wrap wire
vee-shaped wire (Width x height:mm) | support rod
Round wire (mm) |
| 3-1/2 | 88.9 | 1 | 2.9 | >22 | 10.2 | 2.3 x 3.5 | 3.0MMx22 |
| 4-1/2 | 114.3 | 1 | 2.9 | >28 | 11.5 | 2.3 x 3.5 | 3.0MM×22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3 x 3.5 | 3.8MM×32 |
| 6-5/8 | 168.3 | 1 | 5.8 | >33 | 12.8 | 2.3 x 3.5 | 3.8MM×32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.0 x 6.0 | 5.OMM×32 |
| 8-5/8 | 219.1 | 1 | 5.8 | >34 | 21.9 | 2.3 x 3.5 | 3.8MMx48 |
| 8-5/8 | 219.1 | 1 | 5.8 | >50 | 38.2 | 3.0 x 4.6 | 4.0MMx48 |
| 8-5/8 | 219.1 | 1 | 5.8 | >60 | 46 | 3.05 x 6.35 | 5.0MMx48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 9 | 2.5 x 4 .0 | 3.8MM×55 |
| 10-3/4 | 273.1 | 1 | 5.8 | >60 | 39.5 | 3.0 x 4.6 | 4.5MMx55 |
| 10-3/4 | 273.1 | 1 | 5.8 | >100 | 48 | 3.2 x 6.0 | 5.0MM×55 |
| 12-3/4 | 323.9 | 1 | 5.8 | >120 | 37.2 | 3.0 x 6.0 | 4.0MMx56 |
| 14 | 355.6 | 1 | 2.9 | >80 | 37.8 | 3.0 x 5.0 | 4.0MMx59 |
| 16 | 426 | 1 | 2.9 | >80 | 37.5 | 3.0 x 5.0 | 4.OMM×64 |
| PROFILE WIRE | | | | | | | | |
| WIDTH(mm) | 1.50 | 1.50 | 2.30 | 2.30 | 1.80 | 3.00 | 3.70 | 3.30 |
| HEIGHT(mm) | 2.20 | 2.50 | 2.70 | 3.60 | 4.30 | 4.70 | 5.60 | 6.30 |
| SUPPORT ROD | | | | | |
ROUND |
| WIDTH(mm) | 2.30 | 2.30 | 3.00 | 3.70 | 3.30 | Ø2.5--Ø5mm |
| HEIGHT(mm) | 2.70 | 3.60 | 4.70 | 5.60 | 6.30 | ---- |
FAQ
The Important Question: How Many Meters of the well deep can be used in?
A: Common screen pipes can be used in wells with a depth of 200-300
meters.
Large wire can also be customized for 650m deep well.
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass
production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to
arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
---------------------------------------------------------------------------------------------------------------
