Smooth Textured Perforated Plastic Hdpe Geocell Price For Soil
Reinforcement
Brief Introduction of Geocell Confinement System
Geocell Confinement System--also known as Cellular Confinement System(CCS), it is a kind of
three-dimensional network structure shaped by high-strength HDPE
(high density polyethylene) sheets through ultrasonic welding of
high strength. The depth of the geocells as well as the size of
each cellular unit can vary as per design requirements. The surface
of geocells are smooth or textured, the textured geocells increase
soil-geocell wall friction. Geocells can be perforated or
non-perforated. If the depth of geocell is over 10cm, the geocell
can be perforated, the geocell wall is punctured to assist in
immediate dissipation of developed porewater pressures due to
increased stresses within the infill of the individual cells.
Geocell Confinement System Specification
- Cell depth: 50mm,100mm,150mm,200mm,250mm,300mm
- Welding distance: 330mm~1600mm
- Thickness: 1.0mm,1.2mm(smooth), 1.5mm,1.8mm(textured)
- Appearance/surface: smooth/textured
| Specification | cell height (MM) | welding spacing: (MM) | welding spacing: (MM) | weld tensile strength: (KN) |
| GS20 | 200 | 400 | 25 | 2 |
| 330 |
| GS15 | 150 | 400 | 25 | 1.5 |
| 330 |
| GS10 | 100 | 1000 | 25 | 1 |
| 470 |
| 400 |
| 330 |
| GS8 | 80 | 1000 | 25 | 0.8 |
| 470 |
| 400 |
| 330 |
| GS5 | 50 | 470 | 25 | 0.5 |
| 400 |
| 330 |
What is Geocell?
Geocell is a new type of high-strength geosynthetics popular at
home and abroad. It is a three-dimensional mesh cell structure
formed by REINFORCED HDPE sheet material and high-strength welding.
The utility model has the advantages of flexible expansion,
retractable transportation and folding. During construction, it can
be tensioned into a network and filled with loose materials such as
soil, gravel and concrete to form a structure with strong lateral
restriction and large stiffness. It has the characteristics of
light material, wear resistance, stable chemical properties, light
and oxygen aging resistance, acid and alkali resistance, etc. Due
to its high lateral restriction and anti-skid, anti deformation,
effective enhancement of subgrade bearing capacity and scattered
load, it is widely used in: cushion, stable railway subgrade,
stable highway soft foundation treatment, supporting structure of
pipeline and sewer, mixed retaining wall to prevent landslide and
load gravity, desert, beach, riverbed, river Bank treatment, etc.
Geocell Confinement System Characteristic
Product features: 1. It can be retracted and folded during
transportation. During construction, it can be tensioned into a
network and filled with loose materials such as soil, gravel and
concrete to form a structure with strong lateral restriction and
large stiffness. 2. Light material, wear-resistant, stable chemical
properties, light and oxygen aging resistance, acid and alkali
resistance, suitable for different soil conditions such as soil and
desert. 3. High lateral restriction and anti-skid, anti
deformation, effectively enhance the bearing capacity of subgrade
and disperse load. 4. Changing the geometric dimensions such as
geocell height and welding distance can meet the needs of different
projects, with flexible expansion, small transportation volume,
convenient connection and fast construction speed.
Application
Geocell has been popularized and applied in China for more than ten
years and has achieved good engineering results, especially in the
anti-seepage of concrete channel and the projects requiring slope
protection and reinforcement such as expressway, river slope and
retaining wall. In contemporary subgrade construction, geocell is
usually used to effectively prevent the uneven settlement of
subgrade. The reinforcement of geocell can effectively reduce the
vertical stress and shear force in soil and enhance the stability
of subgrade.
Laying method
1. The honeycomb geocell shall be covered during transportation to
prevent long-term exposure and pollution;
2. During hot melt welding of honeycomb cell, process experiment
shall be conducted before construction. Before the experiment,
submit the experiment plan to the supervisor and carry out the
experiment after approval. The lap length shall not be less than
10cm, and the lap surface shall not be pulled within 2h after
welding;
3. When the tensioning grid is laid flat on the slope surface and
the honeycomb geocell is laid, it starts from the slope shoulder
and opens along the slope to the slope bottom. The tensioning
chamber is placed flat on the slope, and the end slot of the cell
is placed in the U-shaped anchor ditch;
4. After the top is fixed, first fix the left and right edges of
the tensioned honeycomb geocell grid, and then temporarily fix the
bottom opening at the lower end with anchor drill. After filling,
pull out the anchor rod used for fixing the lower end;
5. The open honeycomb geocell shall be in a full rhombic shape. It
is strictly prohibited to trample or press with heavy objects to
cause cell deformation;
6. The filling and burial operation shall be carried out after the
honeycomb geocell is inspected to be qualified. The top shall be
filled first, and the top U-shaped anchor ditch shall be buried,
and then the buried pressure ditch at the slope bottom shall be
filled and buried from top to bottom;
7. Humus soil shall be paved on the paved honeycomb cell within 12h
for protection, or other protective measures shall be taken to
prevent ultraviolet radiation and accelerate the aging of honeycomb
cell;
8. After the whole is buried, the soil of one-third of the height
of the honeycomb geocell is covered;
9. No paving is allowed in rainy and snowy weather.
About Hengquan
We have experience for more than 7 years. There are two product
lines for geogrid and geocell. Factory work 24hours a day, we sold
more than 100,000,000rmb last year(2020). Our customers are all
over the world.
Factory and Equipment:
Product inventory:
Application:
Product Type | Height
(mm) | Welding Distance
(mm) | Thickness
(mm) | Tensile Strength of Welding Points (N/cm) | Tensile Strength of Connection of Cells(N/cm) | Tensile Strength at Yield of Each Sheet (Mpa) |
| 50≤H≤250 | 330≤A≤1000 | 1.0~1.2 | ≥100 | ≥120 | ≥20 |
| 50≤H≤250 | 330≤A≤1000 | 1.0~1.2 | ≥100 | ≥120 | ≥20 |
Textured and Not Perforated | 50≤H≤250 | 330≤A≤1000 | 1.5~1.7 | ≥100 | ≥120 | ≥20 |
| 50≤H≤250 | 330≤A≤1000 | 1.5~1.7 | ≥100 | ≥120 | ≥20 |
Remarks: 1. This is a basic technical specification. 2. All of the technical indexes can be reached according to the
customer's demand, and the other special standards will be carried
out by agreement or contact. 3. Our Geocell products have passed CE & GOST-R & SGS
certification. |
HDPE geocell type | | | Load quantity per 40'GP ( m2) |
Smooth Perforated and Not Perforated | | | about 16500 |
Textured Perforated and Not Perforated | | | about 16300 |
Smooth Perforated and Not Perforated | | | about 11100 |
Textured Perforated and Not Perforated | | | about 10800 |
Smooth Perforated and Not Perforated | | | about 20400 |
Textured Perforated and Not Perforated | | | about 20000 |
Smooth Perforated and Not Perforated | | | about 13600 |
Textured Perforated and Not Perforated | | | about 13300 |
Year of Registration: 2014
Place of Registration: China
Registrated Capital: CNY105,000,000.00
Briture Co., Ltd
was approved by Chinese Bureau of Commerce
Leo
Tel: +8615031817097
Whatsapp/Wechat: +8615031817097
Email: leo@hengquan-china.com
Website: www.plastic-geogrid.com
Download PDF: Catalog of Hengquan - geocell.pdf
