Cryptocurrency Mining Submersion Cooling System Air Cooler Dry
Cooler
What's Immersion Cooling or Submersion Cooling?
Immersion cooling refers to the process of immersing servers, GPUs,
ASICs, and other IT hardware in a non-conductive fluid. The fluid
is a far more effective cooling medium than air is and so higher
efficiencies are achievable. Two-phase immersion cooling is similar
but the fluid boils on the hot components.
Benefits of Immersion Cooling:
Reduce Operating Costs by 50%+
Power reduction by removing the fans from the miners (~18% – 25%)
Removal of supplementary cooling systems (Intake / Exhaust fans,
etc. account for another 20% – 25%)
Increase the hash rate of your current equipment
Increase hardware lifespan
Increase the density of miners in your facility
Built in fire protection as our dielectric fluid is non-flammable
Working Diagram:
For Cryptocurrency mining farm, if use immersion cooling system,
our dry cooler is the most cost-effective way to remove heat and a
necessary component of the immersion cooling system, We designed a
full range of immersion optimized dry coolers. From 5kW single fan
unit to the V-shaped 48-921kW dry coolers. Made in China, sized to
your needs.
Also, we have whole immersion cooling system clients, they can also
offer the whole system proposal for you.
Features of dry cooler
| High efficiency heat exchanger: capacity designs for maximizing the
heat transfer relative to the energy consumption of the fan. Tube
and tube coupling design for low pressure drop in the coil on the
media sides(maximum 100KPa at water designing condition). Our
thermodynamic and aerodynamic designing software is long year
tested and proved in Germany |
| Fan: only choose low specific energy consumption fans. Fan nozzle
designs for maximum air flow and air throw.Our fans from the
world`s leading manufacturer are practically proved to be reliable
in operation and long lasting. Motor: protection class IP 54 and
insulation class F. Air separator for each fan. |
| We facilitate you to have a long lasting and low maintainance
operation. Durable material and rigid enclosure with hard gloss
powder coated finish. Protective enclosure for both manifolds and
U-bends. Unit design for outdoor installation. 100% leakage tested
at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. | |
Technical parameter
Dry cooler D3 series parameter (fin space 2.1mm)
| Type D3- | 042-1X800 | 046-1X800 | 051-1X800 | 087-2X800 | 094-2X800 | 103-2X800 | 125-3X800 | 146-3X800 | D53-3X800 | 175-4X800 | 188-4X800 |
Capacity
(KW) | Water | 35℃ outdoor temp. | Inlet | 45℃ | 42.1 | 46.1 | 50.6 | 87.3 | 93.6 | 102.9 | 124.9 | 145.9 | 153.3 | 174.5 | 187.9 |
| outlet | 40℃ |
| 20% Glycol | Inlet | 45℃ | 40.8 | 45.1 | 49.7 | 84.5 | 91.8 | 100.9 | 119.4 | 143 | 150.4 | 168.9 | 184.3 |
| outlet | 40℃ |
| Medium | Water flow | M3/h | 7.3 | 8 | 8.8 | 15.2 | 16.3 | 17.9 | 21.7 | 25.4 | 26.6 | 30.3 | 32.7 |
| Pressure drop | kPa | 49 | 69 | 97 | 48 | 98 | 93 | 21 | 97 | 89 | 48 | 98 |
| Air flow | M3/h | 21454 | 20531 | 19696 | 42906 | 41061 | 39390 | 64364 | 61585 | 59087 | 85811 | 82120 |
| Fan motor(400V/3N/50HZ) | W | 1800 | 1800 | 1800 | 3600 | 3600 | 3600 | 5400 | 5400 | 5400 | 7200 | 7200 |
| A | 3.8 | 3.8 | 3.8 | 7.6 | 7.6 | 7.6 | 11.4 | 11.4 | 11.4 | 15.2 | 15.2 |
| Fan | No X φ | 1x1 x800 | 1x1 x800 | 1x1 x800 | 1x2 x800 | 1x2 x800 | 1x2 x800 | 1x3 x800 | 1x3 x800 | 1x3 x800 | 2x2 x800 | 2x2 x800 |
| Sound pressure level | dB(A) | 50 | 50 | 50 | 51 | 51 | 51 | 53 | 53 | 53 | 54 | 54 |
| 10m |
| Dimension | L | mm | 2000 | 2000 | 2000 | 3800 | 3800 | 3800 | 5600 | 5600 | 5600 | 3800 | 3800 |
| W | mm | 1084 | 1084 | 1084 | 1084 | 1084 | 1084 | 1084 | 1084 | 2108 | 2108 | 2108 |
| H | mm | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 | 1328 |
| A | mm | 1728 | 1728 | 1728 | 3528 | 3528 | 3528 | 5328 | 5328 | 5328 | 3528 | 3528 |
| B1 | mm | -- | -- | -- | 1764 | 1764 | 1764 | 1776 | 1776 | 1776 | 1764 | 1764 |
| B2 | mm | -- | -- | -- | 1764 | 1764 | 1764 | 1776 | 1776 | 1776 | 1764 | 1764 |
| B3 | mm | -- | -- | -- | -- | -- | -- | 1776 | 1776 | 1776 | -- | -- |
| B4 | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| X | mm | 997 | 997 | 997 | 997 | 997 | 997 | 997 | 997 | 997 | 2021 | 2021 |
| Inlet φ | mm | 2” | 2” | 2” | 2 1/2” | 2 1/2” | 2 1/2” | 3’ | 3’ | 3’ | 4” | 4” |
| Inlet φ | mm | 2” | 2” | 2” | 2 1/2” | 2 1/2” | 2 1/2” | 3’ | 3’ | 3’ | 4” | 4” |
| Product weight(empty) | kg | 225 | 233 | 241 | 357 | 373 | 392 | 796 | 527 | 749 | 812 | 1062
|
Why choose us:
1) We can help buyers design specific products or produce products
according to buyers' design
2) We can print logo according to buyers' requirement
3) We has exported to many countries,such as Singapore,
Philippines, Vietnam, Argentina, Peru, Mongolia, Hong Kong,
UAE,Russia, Poland etc.
4) Design term:We have professional design team.
5) Professional factory: We are manufacturer, specializing in
manufacturing heat exchangers for over 16years, competitive price
with good quality.
6) Rapid response to your needs: We will reply within 24 hours
after receiving you letter. If you have urgent thing, welcome to
call us.
7) The Most Efficient Service, Best Quality and Excellent
Reputation.
Packing and loading photo example:
Some immersion cooling system dry cooler reference:
 |  |
Country: USA Application: Bitcoin immersion cooling system Cooling capacity: 1270kW Cooling medium: BC-888 Supply power: 415V/3P/60Hz Fan brand: Ziehl-Abegg
| Country: USA Application: Bitcoin immersion cooling system Cooling capacity: 171kW Cooling medium: bitcoin fluid Supply power: 415V/3P/60Hz Fan brand: Chinese brand
|
