Beryllium Copper Tape BrB2 (Qbe2.0) Thickness 0.12mmx250mm Hard
Temper
Product Description:
Name: Beryllium Copper Tape
Grade: BrB2 (Qbe2.0)
Specification: 0.12mmx250mm
Tolerance: +/-0.005mm
State: Hard
Surface: Bright
CUBERYLLIUM ®-Qbe2 also named Cube2 Beryllium Copper is the most commonly utilized Copper Beryllium
alloy and is notable for its highest strength and hardness compared
to commercial copper alloys. Qbe2 alloy contains appr. 2% of
beryllium and achieves its ultimate tensile strength can exceed
1360Mpa, while the hardness approaches Rockwell C45. Meanwhile, the
electrical conductivity is a minimum of 22% IACS in the fully aged
condition. Qbe2 also exhibits exceptional resistance to stress
relaxation at elevated temperatures.
Chemical Composition of Beryllium Copper Alloy BrB2 (Qbe2.0):
| CUBERYLLIUM® Brand | Gost- Number | Beryllium | Al | Ni | Fe | Cu | Si |
| Cuberyllium-Qbe2 | Qbe2 | 1.80-2.10 | 0.15 max | 0.2~0.5 | 0.15 max | Rest. | 0.15 max |
Typical Physical Properties of Beryllium Copper Alloy BrB2 (Qbe2.0):
Density (g/cm3): 8.36
Density before age hardening (g/cm3): 8.25
Elastic Modulus (kg/mm2 (103)): 13.40
Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6
Thermal Conductivity (cal/(cm-s-°C)): 0.25
Melting Range (°C): 870-980
Shape Available of Beryllium Copper Alloy Qbe2.0:
| Cold Rolled | Hot Worked |
| Strip | ✓ | Rod | ✓ |
| Flat Wire | ✓ | Bar | ✓ |
| Rectangular Bar | ✓ | Plate | ✓ |
| Square Bar | ✓ | Tube | ✓ |
| Plate | ✓ | | |
| Cold Drawn | Special Shapes |
| Rod | ✓ | Turned Rod | ✓ |
| Bar | ✓ | Disc | ✓ |
| Tube&Capillary | ✓ | Forgings | ✓ |
| Wire | ✓ | Extrusions | ✓ |
| Mechanical Properties of Beryllium Copper Tape BrB2 (Qbe2.0) | | | |
| Name | Temper | Thickness
(mm) | Tensile Strength | Hardness | Elongation (min) |
|
| MPa | HV | Percent |
| Qbe2 | Soft | <0.15 | >390 | <130 | >30% |
| 0.15~0.25 | 390~590 |
| >0.25 | 390~590 |
| Hard | <0.15 | >590 | >170 | >3% |
| 0.15~0.25 | 590~880 |
| >0.25 | 640~930 |
After Ageing
(Soft) | <0.15 | >1080 | >330 | >2% |
| 0.15~0.25 | 1080~1470 |
| >0.25 | 1130~1470 |
After Ageing
(Hard) | <0.15 | >1080 | >360 | >1.5% |
| 0.15~0.25 | 1130~1570 |
| >0.25 | 1170~1570 |
Standard Tolerance of Beryllium Copper Tape:
| Tolerance Sheet |
| (MM) |
Strip
Thickness | CuBeryllium®
Standard Tolerance |
| over | incl. | plus or minus |
| 0.03 | 0.08 | 0.003 |
| 0.08 | 0.1 | 0.004 |
| 0.1 | 0.15 | 0.005 |
| 0.15 | 0.2 | 0.006 |
| 0.2 | 0.25 | 0.007 |
| 0.25 | 0.4 | 0.008 |
| 0.4 | 0.55 | 0.009 |
| 0.55 | 0.7 | 0.01 |
| 0.7 | 0.9 | 0.015 |
| 0.9 | 1.5 | 0.025 |
| Note: Tolerances apply to rolled and mill hardened strip. |
New information plz contact info&cuberyllium.com
Product Photo:
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened
process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous
Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
