SL92 12m WWF Concrete Reinforcement Welded Wire Mesh Fabric For Building

· The welded wire fabric makes them easier to work on.
· There are different diameters of steel reinforcing mesh each suited for a particular application.
· There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.
· As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.
· The steel reinforcing mesh is rigid making it possible for you to control concrete cover during construction.
· Manufacturers produce steel reinforcing mesh under SANS1024 Standard Specifications.
· The steel bars stay intact whenever immersed in concrete because they are carefully welded in mats.
· You don’t have to apply additional surface treatment to the steel reinforcing mesh before use.
· Less field labor needed when making reinforced concrete slabs using this mesh thus drastically speeding up the construction process.
· The mesh is easy to load and unload, and easy to handle at the working site.

· Properly mixed concrete is poured into the mesh and then given time to dry out. The concrete, as it continues to dry out, it grips the steel bars tightly creating a bond stress between these two materials. This bond stress is essential because it reduces bending and makes reinforced concrete slabs stronger.

· Square opening steel reinforced mesh: This mesh has stainless wires that runs vertically and horizontally supporting each other while forming small squares.
· Rectangular steel reinforced mesh: This mesh has stainless wires that runs vertically and horizontally supporting each other while forming smaller rectangular shapes.
· Welded steel reinforced mesh for building vertical walls.
· Customized types, also known as special steel reinforced mesh.