Introduction
Here you will see some of our steel coil leveling equipment,
integrating scissor and drop-type stackers. This metal cut to
length production line features hydraulic adjustment and the
finished steel plates have uniform width and flatness, therefore,
the final products made of steel plates have a better appearance
and quality.
Product testing is performed including thickness measurement, width
measurement, coating weight measurement, surface inspection and
flatness inspection in order to satisfy different requirements of
our customers in various industries.
This cut to length line is divided into three series because of
different steel strip thickness and strip width, including:
- Thin coil cut to length line
- Middle thick coil cut to length
- Thick coil cut to length line
Application
The metal coil decoiling, leveling and cut to length line is
applied on cold-rolled steel, hot-rolled steel, carbon steel,
stainless steel, galvanized steel, color steel plates and other
metal materials.
Middle Thick Coil Cut-to-Length Line (1.0-12.7mm)x2000mm
Advantages and Characteristics
- High precision.
- Maximum line speed can reach 30m/min, 7-8pcs/min in average;
- Leveling precision: ±1mm/㎡;
- Sheet length precision: ±0.5mm/m;
- Sheet diagonal length precision: ±0.5mm/m;
- If the loaded steel coil is lightweight, the single mandrel
(cantilever) uncoiler is typically adopted; When the coil is big
and heavy, Coils differ in coil weight, when the max coil weight is
small, asingle mandrel (cantilever) uncoiler is adopted; when max
coil weight is large, a double-cone uncoiler is adopted for middle
thick coil cut-to-length lines.
- To make flat steel sheets, the diameter of leveling rollers should
be properly calibrated; our leveling roller diameter is decided
through comprehensive experience and precise engineering
calculation.
- The support rollers installed on the bracket can tighten up the
leveling rollers to make sure no deformation of leveling rollers
while leveling.
- Product conveyor sends finished sheets onto the pneumatic packing
platform.
- We adopt high quality parts supplied by famous brands, e.g.
Yuken/Fuxin hydraulic parts, HRB/ZWZ/SKF bearings, etc. which can
ensure good performance of the coil CTL line.
Technical Parameters
| Model | Thickness | Width | Length | Leveling speed |
| CTL-6 x 1600 | 1.0-6.0mm | 600-1600mm | adjustable | ≦ 40m/min |
| CTL-8 x 1800 | 2.0-8.0mm | 1000-1800mm | adjustable | ≦ 30m/min |
| CTL-10 X 2000 | 3-12.7mm | 1000-2000mm | adjustable | ≦ 30m/min |
