Network Switch Poe SC Connector Dual Fiber Industrial Switch Hub
With 2 RJ45 Ports
Introduction of Network Switch
IM-FP122GE series is the 10/100/1000 Mbps industrial POE fiber
switch, comply with IEEE802.3af/at, power on POE IP cameras through
the Ethernet cable, simple construction, power range up to 100
meters, operating temperature -40 ℃ to + 75 ℃, meet IP44 protection
degree and EMC industrial grade requirements, DIN rail
installation, pass through dangerous environmental certification
and comply with FCC and CE standards. The reliable industrial grade
design could ensure continuous and stable operation of the
automation system.
Key Features of Network Switch
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af power on to 1 ~ 2 RJ45 ports
- 2x 10/100/1000Mbps Auto-sensing RJ45 ports
- 1x 1000Mbps SFP fiber port
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Max power to15.4W under af standard, 30W under at standard to each
PoE port
- Detect the PoE models of electrical equipments.
- A store-and-forward switching mechanism
- Operating environment temperature:-40 ° ~75 ° c
Industry Standards of Network Switch
- EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
- EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8
- Traffic Control: NEMA-TS2
- Vibration:IEC 60068-2-6
- Freefall:IEC 60068-2-32
- Shock:IEC 60068-2-27
- Rail Traffic: EN 50121-4
Specification of Network Switch
| Product Name | 10/100/1000Mbps Industrial POE Fiber Switch (1F+2TP) |
| Model No. | IM-FP122GE |
| Port | 1x 1000Mpbs SFP port SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 2x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M
Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~2) (802.3at standards required special instructions) |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell Safety class:IP44 Dimension:114.8 x 114 x 60mm Mounting method:Din-rail mounting |
| Warranty | 3 years |
FAQ of Network Switch
Q: Do you provide OEM service?
A: Yes, we provide OEM service. If you have requirements about the
customized product, we also provide it.
Q: Do you have CE, FCC, ROHS?
A: Yes.
Q: How do you guarantee the quality?
A: we absolutely never use old and refurbished materials. Always a pre-production sample before mass production; 48 hours
aging test before delivery. Always final Inspection before
shipment;
Packaging And Delivery
One 22*16*6cm box includes one media converter, one user manual,
and one warranty card.
Lead Time: usually three to five days, it depends on the quantity.
Application of Network Switch
Photo of Network Switch
