Electrical Insulators Aramid Paper Insulation Paper 0.05mm
Thickness 26mm Width
Product Introduction :
Sheets of the aramid paper are layered and bonded together to form
panels that are then sliced to the desired thickness
Aramid Paper is a high-temperature resistant insulation product
with an excellent balance of physical and electrical properties.
1) The product is in the form of milky white flat paper rolls, with
dense paper structure and uniform texture.
2) The paper surface is flat, smooth, without pinholes, lint-free,
lint-free, and neatly trimmed.
3) It has excellent thermal stability and flame retardancy, and can
be used normally at a high temperature of 210°C for a long time
(above H level)
4) Outstanding mechanical properties, with high tensile strength
and tear strength.
5) Good compatibility with various commercial varnishes,
lubricants, etc.
6) Safety, environmental protection, chemical corrosion resistance,
passed SGS ROHS and REACH certification.
7) It has excellent electrical insulation properties, high
dielectric strength and low dielectric loss.
Specification :
Standard
Specification:Thickness:0.10/0.13/0.15/0.18/0.20//0.22/0.25/0.30/0.35(mm)
Width: 980(mm)
Nominal Thickness | mm | 0.04 | 0.05 | 0.08 | 0.13 | 0.18 | 0.25 | 0.30 | 0.38 | 0.51 | 0.76 |
Test Standard |
| mil | 1.5 | 2 | 3 | 5 | 7 | 10 | 12 | 15 | 20 | 30 |
Dielectric strength | kV/mm | 10.5 | 10.4 | 8.2 | 8.7 | 20.8 | 21.4 | 22.1 | 21.9 | 23.3 | 23.6 | GB/T 1408.1-2006 |
| V/mil | 267 | 264 | 208 | 221 | 528 | 544 | 561 | 556 | 559 | 599 |
| Dielectric constant (50Hz) | 1.05-2.0 | 1.052.5 | 2.0-3.5 | 3.04.0 | GB/T1409-2006 |
| Dielectric loss factor (50Hz) | 0.001-0.01 | 0.01-0.02 | GB/T1409-2006 |
| Nominal Thickness | mm | 0.04 | 0.05 | 0.08 | 0.13 | 0.18 | 0.25 | 0.30 | 0.38 | 0.51 | 0.76 |
| mil | 1.5 | 2 | 3 | 5 | 7 | 10 | 12 | 15 | 20 | 30 |
| Width | mm | 914±0.5 | 914±0.5 | 914±0.5 | 914±0.5 | 914±0.5 | 914±0.5 | 914±1.0 | 900±1.0 | 900±2.0 | 900±2.0 |
| Length | m | 4200±400 | 2800±200 | 1750±100 | 950±60 | 640±50 | 370±30 | 220±20 | 140±15 | 105±15 | 65±10 |
| Weight | kg | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | 50 |
| Knot qty | ≤2pcs/roll | ≤1pc/roll |
| Knotting Way | Butt with scotch tape |
| Knot Mark | Red insulating tape |
Picture show:
Safety certificate:
Application:
L233A meta-aramid insulation paper has a uniform structure, a
smooth and fine surface, and a uniform paint absorption
performance. It is widely used in combination with polyester film
or polyamide. Multi-layer flexible composite materials laminated by imine film,
or high-end insulation fields such as insulating tapes through
coating, slitting and die-cutting The other products are used in insulation fields such as motors,
transformers and reactors with F-class or H-class insulation
requirements.
