Laser Wire Diameter Gauge and Measuring Tool in Wire and Cable Testing Equipment
Installation position: 
The outside diameter measuring and controlling instrument can be installed before or after the cooling
water tank. When it is installed in front of the tank, the best control effect can be obtained by feedback control in time because the measuring head is close to the extruder. However, the plastic has not been solidified, so the set nominal value should be modified appropriately. When it is installed behind the sink, the actual cable diameter is measured, which is more accurate and reliable, but the control lag is large and the control effect is slightly poor. In addition, the measured cable must be blown dry, otherwise the water film outside the cable will affect the measurement accuracy. In actual use, the nominal value should be appropriately increased according to the degree of water carried by the measured object.
water tank. When it is installed in front of the tank, the best control effect can be obtained by feedback control in time because the measuring head is close to the extruder. However, the plastic has not been solidified, so the set nominal value should be modified appropriately. When it is installed behind the sink, the actual cable diameter is measured, which is more accurate and reliable, but the control lag is large and the control effect is slightly poor. In addition, the measured cable must be blown dry, otherwise the water film outside the cable will affect the measurement accuracy. In actual use, the nominal value should be appropriately increased according to the degree of water carried by the measured object.
The product description:
Non-contact optical measurement
Operation panel display from multiple perspectives
Laser or LED long life light source
USES the advanced DSP processing technology
The fine dust, the resistance design
Degree of protection IP65, NEMA4
S232/485 communication interface
Automatic closed-loop control technology, automatic feedback control line size
Measurement is not affected by velocity and vibration, the wire diameter out-of-tolerance alarm automatically
Scan speed 600 times per second fastest (up to 1400 times per second)
Operation panel display from multiple perspectives
Laser or LED long life light source
USES the advanced DSP processing technology
The fine dust, the resistance design
Degree of protection IP65, NEMA4
S232/485 communication interface
Automatic closed-loop control technology, automatic feedback control line size
Measurement is not affected by velocity and vibration, the wire diameter out-of-tolerance alarm automatically
Scan speed 600 times per second fastest (up to 1400 times per second)
