An HSNS3 board receives mixed signals of STM-16/STM-64 services
with the total bandwidth not higher than 40 Gbit/s from the
backplane, encapsulates them into ODU1/ODU2/ODU3/OTU3 units, and
transmits them out through an optical port.
Table 1 and Table 2 list the functions and features supported by an
HSNS3 board.
Table 1 Functions and features supported by an HSNS3 board
| Function and Feature | Description |
|---|
| Basic functions | - Provides one OTU3 optical port to transmit/receive and process
1xOTU3 services.
- Supports four virtual ports to carry 4 x 10 Gbit/s SDH services.
- Supports a maximum of four virtual ports when
receiving/transmitting STM-16 services.
- Supports a maximum of four virtual ports when
receiving/transmitting STM-64 services.
NOTICE:The board capacity is license-controlled. One license provides a 10
Gbit/s capacity and one board provides a maximum capacity of 40
Gbit/s. The board license is granted on a per-board basis. |
| Optical module specifications | - Supports CFP pluggable optical modules.
- Supports the monitoring and querying of optical module information.
- Switches lasers on or off and provides automatic laser shutdown
(ALS).
|
| Error correction coding | - Supports forward error correction (FEC) coding in compliance with
ITU-T G.709.
- Supports EFEC coding in compliance with ITU-T G.975.1.
NOTE:HSNS3 boards using different error correction coding schemes cannot
interconnect with each other. |
| Synchronization | Supports four channels of SDH clock signals or one channel of OTN
clock signals. |
| Overhead processing | Supports processing of D1-D12 bytes by virtual ports 51, 52, 53,
54, 55, 56, 59, and 63, and processing of D1-D3 bytes by the other
eight virtual ports. |
| Alarm monitoring and performance monitoring | Monitors the bias current and operating temperature of lasers, and
the optical power. |
| Automatic fiber search | Supported |
| Maintenance features | - Supports inloops and outloops at optical ports.
- Supports ODU1/ODU2 loopbacks.
- Supports warm and cold resets, with warm resets not affecting
services.
- Supports the querying of manufacturer information.
- Supports in-service FPGA loading.
- Supports smooth upgrades of board software.
- Monitors and reports voltage performance.
- Supports one-click data collection.
- Supports pseudo random binary sequence (PRBS) tests.
|
| Automatically switched optical network (ASON) | Only virtual ports 51, 52, 53, 54, 55, 56, 59 and 63 support SDH
ASON. |
Table 2 SDH functions and features supported by HSNS3 boards
| Function and Feature | Description |
|---|
| Basic functions | Receives a maximum of 4xSTM-16 or 4xSTM-64 SDH service signals from
the backplane, encapsulates the received signals into
ODU1/ODU2/ODU3/OTU3OTU3 units, and sends out the multiplexed
signals from its optical port.The service mapping paths are as follows: - STM-16 <-> ODU1 <-> ODU3 <-> OTU3
- STM-64 <-> ODU2 <-> ODU3 <-> OTU3
|
| Limitations on virtual ports | Four virtual port IDs 51, 55, 59 and 63 can be configured. |
| Service processing | Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-8c, VC-4-16c, and
VC-4-64c services (VC-4-4c, VC-4-8c, VC-4-16c, and VC-4-64c
services are concatenated services). |
| Overhead processing | - Processes section overheads of STM-16 or STM-64 signals.
- Transparently transmits or terminates path overheads.
- Supports the setting and querying of J0, J1, and C2 bytes.
- Supports one channel of GCC0 communication and ECC communication on
four virtual ports.
|
| Protection schemes | - Supports two-fiber bidirectional ring multiplex section protection
(MSP).
- Supports Linear MSP.
- Supports subnetwork connection protection (SNCP).
- Supports subnetwork connection tunnel protection (SNCTP).
|
| Maintenance features | Supports inloops and outloops on VC-4 paths. |
Relationship between the feature code of the HSNS3 and the default
license capacity
The technical specifications of HSNS3 boards include optical port
specifications, laser hazard level, mechanical specifications, and
power consumption.
Port Specifications
Table 1 Port specifications
| Port Type | Description |
|---|
| 40GBASE-ZR4 | 80 km 40GE two-fiber bidirectional optical port |
| 40GBASE-ER4 | 40 km 40GE two-fiber bidirectional optical port |
| 40GBASE-LR4 | 10 km 40GE two-fiber bidirectional optical port |
Supported Wavelengths
HSNS3 boards support the following wavelengths:
- 1271 nm, 1291 nm, 1311 nm, and 1331 nm when the transmission
distance is 10 km or 40 km
- 1531.12 nm, 1537.4 nm, 1543.73 nm, and 1550.12 nm when the
transmission distance is 80 km
NOTE:An optical module supporting a transmission distance of 40 km or 10
km cannot interconnect with an optical module supporting a
transmission distance of 80 km.
Laser Hazard Level
The laser hazard level of the optical port on an HSNS3 board is
CLASS 1. That is, the maximum launched optical power of the optical
port is lower than 10 dBm (10 mW).
Mechanical Specifications
The mechanical specifications of HSNS3 boards are as follows:
- Dimensions (H x W x D): 261.4 mm x 50.3 mm x 235.2 mm
- Weight: 2.3 kg
Power Consumption
The maximum power consumption of an HSNS3 board at room temperature
(25ºC) is 55 W.
DHL
Fedex
By Sea
Notice:
Deliver to port:
Deliver to door:
100% Low Price Guarantee:
100% Quality Assurance:
Free Technical Support:
100% Money Back Guarantee:
Flexible Secure Payment & Shipment:
