Aluminum Alloy 80km/H Buzzer Absorb The Impact Force Truck Mounted
Attenuator
The tractor is installed at the rear of the road maintenance
vehicle and is mainly suitable for temporary road safety
maintenance construction. The vehicle installed with this device is
parked behind the construction work area to absorb the impact of
the vehicle due to rear-end collision. So as to protect the safety
of the work area.
The exterior of the product is yellow electrostatic spraying, the
yellow body is matched with red and white warning strips, bright
LED arrows, and the yellow warning buzzer on the top can bring a
good warning effect to the driver. When the driver accidentally
hits the device, the internal special aluminum structure of the
absorption part can absorb a large amount of impact with its unique
shock absorption design, minimize the accident damage, and achieve
the effect of protecting the safety of people and vehicles. If the
deformation is not serious, the repair work can be easily completed
by replacing the internal absorbent material.
Although the volume of the device is relatively large, the
structure design is reasonable. The bottom of the device is
equipped with wheels, as long as it is fixed behind the
construction vehicle, it can be easily taken away. The device comes
with an LED direction arrow, which can switch the direction at
will, and it can also remind the rear driver to pay attention to
the construction vehicle in the case of low visibility. The arrow
board part can be raised and lowered. When not in use, it can be
stored to save storage space.
Product advantages
1. This Truck Mounted Attenuator is equipped with warning light and
LED light guide arrow plate, which can play a good warning effect
in bad weather conditions. LED arrow board can adjust the
direction, indicating more convenient.
2. The Truck Mounted Attenuator has large volume and high
stability.
3. The Truck Mounted Attenuator is equipped with wheels, which is
easy to carry. It can be hung behind the construction vehicle and
move at high speed.
4. The inner part of the absorption device is our exclusive
aluminum profile, which has strong absorption capacity and is easy
to repair.
5. The red and white reflective warning film has obvious warning
effect.
6. The arrow plate has the function of lifting and lowering, which
can be put away when not in use. It's very simple to operate.
7. With beep warning device, it can alarm in emergency.
Structural drawing of the product
The picture shows the internal absorption material developed by our
company, which has high shock absorption capacity. It has obtained
an invention patent (patent number: ZL 2006 1 0057817.8), and has
passed safety tests overseas and officially adopted it. The profile
is a recyclable and environmentally friendly product.
